Panasonic Spur Gearbox, 50:1 Gear Ratio, 1.57 Nm Maximum Torque, 25rpm Maximum Speed

  • RS-artikelnummer 424-194
  • Tillv. art.nr MX6G50B
  • Tillverkare / varumärke Panasonic
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

6W 60x60mm Panasonic 3 Series Gearboxes

Note

Panasonic 3 Series 6W Gearboxes can only be used with Panasonic 3 Series 6W Motors.

Panasonic 3 Series Motors and Gearboxes

Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors:

Grease-lubricated gearboxes
10000hr life
Quiet operation
Class B motor insulation

A number of additional design changes include:

A number of gearboxes with shorter gearheads
Different motor shafts (non-interchangeable with G Series gearboxes)

Note

Panasonic 3 Series Motors can only be used with Panasonic 3 Series Gearboxes.

Approvals

UL, CE and CCC

Specifikationer
Attribute Value
Gear Ratio 50:1
Gearbox Type Spur
Maximum Output Torque 1.57 Nm
Shaft Diameter 8mm
Overall Length 60mm
Overall Width 60mm
Overall Depth 24.5mm
Maximum Speed 25rpm
Power Rating 6 W
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 208,13 kr
(exkl. moms)
1 510,16 kr
(inkl. moms)
Enheter
Per unit
1 +
1 208,13 kr
Related Products
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
Low to medium power dc. motors fitted with ...
Description:
Low to medium power dc. motors fitted with a square mounting flange, centring bush and drive pinion. This allows simple and quick attachment to a 65mm square gearbox. All motors have sintered bronze bearings lubricated for life32mm diameter motors have ...
2 and 3 shaft right angle drive boxes ...
Description:
2 and 3 shaft right angle drive boxes with 1:1 and 2:1 speed ratios. Shafts are machined with keyways to DIN standardsAll gearboxes are supplied correctly filled lubricant retained by seals, which remain functional under normal operating conditions2 shaft version ...
Suitable for motion, movement or positioning applications, where ...
Description:
Suitable for motion, movement or positioning applications, where the user can select the drive or gearbox unit to be fitted. These gearheads can be fitted to a wide range of motors.