RS PRO Gate Valve, 1/2in

  • RS-artikelnummer 261-0299
  • Tillv. art.nr 203007
  • Tillverkare / varumärke Legris
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Brass Gate Valves

High quality lubricated packing
Non rising stem
Can be re-packed under pressure
Solid brass wedge
BSI Kitemark approved: License no. KM-06045.
Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356

Approvals

BSI Kitemark License No. KM 06045

Standards

BS5154 - PN20; BS21

Specifikationer
Attribute Value
Connection 1/2 in BSPT
Maximum Working Pressure 20 bar
Handle Height from Center 85mm
Body Material Brass
Connection Size 1/2in
Thread Standard or Connection Type BSPT Female
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Pris (ex. moms) Each
161,72 kr
(exkl. moms)
202,15 kr
(inkl. moms)
Enheter
Per unit
1 - 4
161,72 kr
5 +
151,69 kr
Nästa dag-leverans inte möjlig
Related Products
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approvedSmall and quiet in operationMinimum working pressure 0.15 barFits most tanks and cisternsManufactured from 4-ton tensile strength engineering resin to high tolerancesAvailable for side and bottom ...
High quality brass valves. Manufactured in accordance with ...
Description:
High quality brass valves. Manufactured in accordance with BS5154 series BCompression ends are in accordance with BS864: part 2 (based on PN20), 5 bar at 120°C (hot)Solid taper wedge and non-rising spindleAsbestos-free gland packing, replaceable whilst in serviceSuitable for water ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per secondSuitable for use with water or compressed airCan be installed in any position and serviced in situSingle ...