SF Detection 2102B0511 Carbon Monoxide Gas Detector

  • RS-artikelnummer 390-0874
  • Tillv. art.nr SF340F
  • Tillverkare / varumärke SF Detection
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

SF340 Carbon Monoxide Detectors

The SF340 series of CO detectors are designed for fixed and permanent installations, officially approved and kite-marked to BS7860 - the British standard for domestic CO alarms.They incorporate a unique module replacement system. There are no re-wiring or main unit replacement costs - just a simple, clip-in module to change once every 5 years. This results in low ownership costs and minimal maintenance. Optional locking screws also ensure that only authorised persons can gain access to the unit.

Battery backup - each unit offers up to 5 years battery backup for continuous protection, even in the event of power loss
Uses advanced electrochemical sensing technology, specially developed for detection of CO at low concentration without being adversely affected by other gases, household agents or environmental changes
Continuously monitors the environment for CO and provides an audible and visual alarm when concentration reaches 150ppm - the alarms continue if the gas remains at a dangerous level
An internal diagnostic facility means the SF340 carries out continuous self-monitoring. If any fault is located in the sensor, battery or circuits, the unit will automatically give a warning signal within 60 seconds
Complete 10 year guarantee on the main unit and a full 5 year guarantee on each sensor module
Relay/interconnect option available, enabling connection to control panels, shut-off valves, remote alarms etc. This also allows numbers of alarms to be linked together in series

SF340E - 230V, 50Hz standard model
SF340F - 230V, 50Hz relay output model (for relay and interconnect feature)

Note

For a full range of gas detection tubes see typically stock no. 376-9875

Supplied with

Installation kit and full fitting/operational instructions.

SF Detection Carbon Monoxide Gas Detector

The SF detection wall mount gas detector is designed for fixed and permanent installations, officially approved. It incorporates a unique module replacement system. There is no re-wiring or main unit replacement costs just a simple, clip-in module to change once in every 5 years. This results in low ownership costs and minimal maintenance. Optional locking screws also ensure that only the authorised person can gain access to the unit. It uses advanced electrochemical sensing technology, specially developed for detection of CO at low concentration without being adversely affected by other gases, household agents or environmental changes. It continuously monitors the environment for CO and provides an audible and visual alarm when the concentration reaches 150ppm - the alarms continue if the gas remains at a dangerous level. An internal diagnostic facility means the SF340 carries out continuous self-monitoring. If any fault is located in the sensor, battery or circuits, the unit will automatically give a warning signal within 60 seconds.

Battery backup - Each unit offers up to 5-year battery backup for continuous protection, even in an event of power loss.

SF340E - 230V, 50Hz standard model
SF340F - 230V, 50Hz relay output model (for relay and interconnect feature)

Note:
For a full range of gas detection tubes see typically stock no. 376-9875

Supplied with:
Installation kit and full fitting/operational instructions.

Gas detection: Carbon monoxide detection
Carbon Monoxide is a deadly toxic gas that has no smell and cannot be seen or tasted. Its presence is lethal causing death and injury, it can be caused by poorly installed or maintained heating appliances, chimneys, flues and gas-fired cooking appliances. Even low levels of CO can impair judgement and greatly increase the risk of accidents and injury in motorists and machine operators. See 'key characteristics' table for details of the carbon monoxide level and their effects.

Features and Benefits


Complete 10-year guarantee on the main unit and a full 5-year guarantee on each sensor module
• Relay/interconnect option available, enabling connection to control panels, shut-off valves, remote alarms, etc.
• Battery type is 9V
• Operating temperature ranges between -5⁰C and 40⁰C

Applications


Boiler plant rooms
• Domestic environment
• safety of tenants
• Power plants
• Refrigeration plants
• Textile industry

Certifications


BS7860

Standards

BS7860

Gas Detection: Carbon Monoxide Detection

Carbon Monoxide is a deadly toxic gas that has no smell and cannot be seen or tasted. Its presence is lethal causing death and injury, it can be caused by poorly installed or maintained heating appliances, chimneys, flues and gas fired cooking appliances.,Even low levels of CO can impair judgement and greatly increase risk of accidents and injury in motorists and machine operators. See "key characteristics" table for details of carbon monoxide level and their effects.

Specifikationer
Attribute Value
Gases Detected Carbon Monoxide
Application Domestic Environments
Meter Type Wall Mounted
Audible Alarm Yes
Visual Alarm Yes
Power Source Battery
Battery Type 9V
Dimensions 170 x 110 x 65mm
Weight 575g
Maximum Operating Temperature +40°C
Model Number p SF340F
Width 110mm
Height 65mm
Length 170mm
Minimum Operating Temperature -5°C
Denna produkt har utgått
Related Products
Crowcon T4 portable multigas detectors are intrinsically safe, ...
Description:
Crowcon T4 portable multigas detectors are intrinsically safe, hazardous area certified, for use in harsh environments. They offer compliance, robustness and low cost ownership in a simple-to-use solution. The large single button allows operation while wearing gloves. The intuitive menu ...
Gases Detected:CFC's - R11, R12, R13 etc; HCFCs ...
Description:
Gases Detected:CFC's - R11, R12, R13 etc; HCFCs - R22, R502, R500 etc; HFCs - R134A, R123, R125, R23 etc (partial list). Detects all existing refrigerants which include HFCs, HCFCs, CFCsHigh sensitivity mode to locate small leaksAudio and visual (LED) ...
The Testo 316-1 detects gas leaks in heating ...
Description:
The Testo 316-1 detects gas leaks in heating systems.Rapid response time. Bendable measurement probe.Optical and audible alarms signal when limits are exceeded.Applications:checking for leaks in domestic gas pipes, safety for heating technicians, protecting inhabited areas.AAA alkaline batteries (stock no.: ...
Carbon Monoxide is a deadly toxic gas that ...
Description:
Carbon Monoxide is a deadly toxic gas that has no smell and cannot be seen or tasted. Its presence is lethal causing death and injury, it can be caused by poorly installed or maintained heating appliances, chimneys, flues and gas ...