Trenz Electronic GmbH TE0710-02-100-2IF Dual fast Ethernet Artix Module with Xilinx Artix-7 100T (ind. temp. range)

The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, two 10/100 Mbit Ethernet PHYs, 512Mb DDR3 SDRAM with 8-bit width, 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It is used for industrial applications.

• Dual 100MBit Ethernet Phy
• It has 100MHz speed
• Lead free
• MAC address EEPROM
• on-board high efficiency DC-DC converters
• Operating temperature ranges between -40°C and 85°C
• Plug-on module with two 100-pin hermaphroditic stacking strips
• Rugged for shock and high vibration
• Single-ended FPGA I/O pins available on B2B strips up to 112
• System management and power sequencing

• WEEE