Hirose FH28 0.5mm Pitch 50 Way Right Angle SMT Female FPC Connector, ZIF Bottom Contact

  • RS-artikelnummer 772-7077
  • Tillv. art.nr FH28-50S-0.5SH(05)
  • Tillverkare / varumärke Hirose
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Hirose FH28 Series 0.5 mm FPC/FFC Connectors

FH28 0.5 mm ZIF (zero insertion force) FPC/FFC connectors with a robust, ruggedized design. These FH28 FPC/FFC connectors have a robust flip lock actuator which is supported either end of the connector by reinforced metal fittings. The actuator is held down by a hook at each contact point along its whole length ensuring a secure connection and preventing the actuator from disengaging. When the actuator is fully closed, it produces a tactile click to confirm it is firmly locked in place. These FH28 FPC/FFC connectors feature side catches for use with tabbed FPC. The positioning tabs on the FPC slot inside these catches allowing it to be accurately aligned and positioned. When the actuator is locked down the tabs act as a strain relief and increase the retention force of the FPC. These FH28 FPC/FFC connectors can also be used with straight sided or non-tabbed FPC. The bottom of these FPC/FFC connectors is solid and the contacts are not exposed allowing the connector to be mounted over conductive traces on the PCB.
These FH28 0.5 mm ZIF FPC/FFC connectors accept a standard 0.3 mm thick FPC/FCC
FH28E and FH28H FPC/FFC connectors have a metal fitting that extends further out from housings edge for manual soldering
FH28H FPC/FFC connectors have a narrower, space saving actuator

Features and Benefits

• Robust design
• Reinforced flip-lock actuator for easy FPC/FFC insertion and secure retention
• Tactile click confirms full closure of actuator
• Side catches for increased tabbed FPC/FFC retention
• Enclosed design enables mounting over conductive traces on the PCB

Applications

• Industrial equipment
• Consumer electronics
• GPS navigation
• Test and measurement equipment
• Barcode readers
• Medical devices

0.5mm FPC/FFC - Hirose

Specifikationer
Attribute Value
Number of Contacts 50
Contact Material Phosphor Bronze
Pitch 0.5mm
Mounting Type Surface Mount
Gender Female
Termination Type ZIF Bottom Contact
Body Orientation Right Angle
Locking Mechanism Yes
Current Rating 500mA
Voltage Rating 50 V ac
Series FH28
Number of Rows 1
Contact Plating Gold
Minimum Operating Temperature -40°C
Termination Method Solder
Maximum Operating Temperature +105°C
Housing Material Liquid Crystal Polymer
25 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
15,60 kr
(exkl. moms)
19,50 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 - 95
15,60 kr
78,00 kr
100 - 370
13,272 kr
66,36 kr
375 - 1495
11,72 kr
58,60 kr
1500 - 2995
10,556 kr
52,78 kr
3000 +
10,042 kr
50,21 kr
Related Products
WR-FPC 0.5 mm SMT FPC ZIF connectors with ...
Description:
WR-FPC 0.5 mm SMT FPC ZIF connectors with a bottom contact configuration and hinged flip-lock actuator. These 0.5mm FPC ZIF connectors have a low profile, lightweight, space saving design and meet the increasing demand for high density, secure connections in ...
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors. ...
Description:
0.5 mm Pitch, 0.9 mm Height, FPC/FFC Connectors. Low-profile 0.5mm pitch FPC/FFC ConnectorsConductive traces on the PCB can run under the connectorProven Flip-Lock Actuator System assures easy and reliable operationAccepts 0.2mm & 0.3mm thick FPC/FFCBoard placement with automatic equipmentWide range ...
FH40 series 0.5mm pitch vertical FPC connectors with ...
Description:
FH40 series 0.5mm pitch vertical FPC connectors with rotating Back-Flip actuator allowing easy insertion. These 0.5mm pitch FPC connectors have a 5.8mm above board height. Unique Flip-Lock rotating actuator enables completion of FPC insertion and joining in same actionSide catcher ...
The Hirose FH50 series, 0.5mm pitch, female horizontal ...
Description:
The Hirose FH50 series, 0.5mm pitch, female horizontal receptacle FPC connector has ZIF bottom contact termination type with SMT termination method and is a surface mount device. the FPC connector secures FPC retention with raised side-catches and protects against dust. ...