Flow Switch Gems Sensors FS-550E

  • RS-artikelnummer 395-7224
  • Tillv. art.nr 020-3499
  • Tillverkare / varumärke Gems Sensors
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

FS-550E Series Flow Switch

Standard FS-550E switches sense liquid flow in either direction to monitor flow/no flow conditions. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases, the paddle pivots to move out of the liquid path, producing less than 200 MB of pressure drop regardless of pipe size.

Features and Benefits

• Flow: 15.0 l/min - 125.0 l/min with preadjusted set points • Housing: Brass or stainless steel
• Minimum inline restriction; Paddle pivots to move out of liquid path with increasing flow
• Operating temperature: 150°C maximum

Product Application Information

• Compressors • Heat Exchangers
• Turbines
• Engine
• Boilers
• Chillers
• Valves
• Pumps
• Regulators

Specifikationer
Attribute Value
Media Monitored Liquid
Device Type Paddle
Minimum Flow Rate 15 L/min
Maximum Flow Rate 125 L/min
Supply Voltage 250 V
Pipe Diameter Range 1 in
Connection Type 1 BSP
Maximum Pressure 55bar
Material Stainless Steel
Minimum Operating Temperature -18°C
Maximum Operating Temperature +100°C
Series FS-550E
16 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
4 068,46 kr
(exkl. moms)
5 085,58 kr
(inkl. moms)
Enheter
Per unit
1 +
4 068,46 kr
Related Products
Gems™ hall effect turbine flow rate sensor is ...
Description:
Gems™ hall effect turbine flow rate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost coupled with 1/2% repeatability makes it an ideal candidate for replacing dispensing timer systems. Turbine technology does not react to ...
This series of precision-calibrated switches provide reliable and ...
Description:
This series of precision-calibrated switches provide reliable and consistent performance; repeatability is within 1%. FS-925 units are factory preset for actuation at specified flow rates.These switches provide accurate detection of excessive or insufficient flow rates. They protect against loss of ...
An easy to adjust flow switch suitable for ...
Description:
An easy to adjust flow switch suitable for use with water, oils and gases. Adjustment for fluid variants is infinite between 1.8 l/pm and 75.7 l/pm and is done simply using a flat bladed screwdriver. Once adjusted the adjustment screw ...
Provides accurate flow detection in water and oil ...
Description:
Provides accurate flow detection in water and oil with 1% repeatability. Flow settings on the adjustable version can be easily changed without disassembly. A shuttle by-pass vane inside the housing is controlled externally using an ordinary flat-blade screwdriver. These switches ...