Siemens Control Unit Control Unit

  • RS-artikelnummer 804-3878
  • Tillv. art.nr 7MH7562-2AA
  • Tillverkare / varumärke Siemens
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CA
Produktdetaljer

SITRANS CU 02 Controller

SITRANS CU 02 control module for use with Siemens AS100 acoustic flow detection sensors. These control modules can be mounted up to 500m from the sensor and each relay output can be programmed independently.

0 to 10V DC input
2 programmable relay outputs (Form C, latching or non latching)
4 to 20 mA DC analogue output
DIN rail mounting
IP20 ingress protection
Operating conditions: -20°C to +50°
Supply Voltage: 115 VAC 8043878 /230 VAC 8043872

Siemens Flow / Motion Sensing

Specifikationer
Attribute Value
Accessory Type Control Unit
For Use With AS 100 Acoustic Sensor
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
6 940,00 kr
(exkl. moms)
8 675,00 kr
(inkl. moms)
Enheter
Per unit
1 +
6 940,00 kr
Nästa dag-leverans inte möjlig
Related Products
The principle of operation is when a liquid ...
Description:
The principle of operation is when a liquid flows through the pipe, the paddle wheel in the fitting (S030 Flow Adaptor -available separately) is set in rotation inducing a measuring frequency in the transducer, which is proportional to the flow. ...
The PFM series from SMC are dual flow ...
Description:
The PFM series from SMC are dual flow switches designed to detect microchip component adsorption in vacuum, congestion in filters and nozzles. Compact and light weight design, suitable for use with carbon dioxide, air, nitrogen or argon. Flow rate range: ...
This lightweight, compact flow sensor is intended as ...
Description:
This lightweight, compact flow sensor is intended as a low cost option for flow rates of 1 to 20 l/min with low pressure drop. Basic construction consists of a one piece sensor body housing a turbine rotor. Flow through the ...
MR3000 molded flow meters supplied with scales in ...
Description:
MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water.Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C).These economically designed units ...