Turck, 1 → 150 (Water) cm³/s, 3 → 300 (Oil) cm³/s Flow Controller, M12 Connector, PNP

  • RS-artikelnummer 313-2447
  • Tillv. art.nr FCS-GL1/2A4-AP8X-H1141/D023
  • Tillverkare / varumärke Turck
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

Digital Flow Control Sensor

Sensor and signal processor in one stainless steel compact housing
On-delay time: 8s (typical)
Ingress protection to IP67
Simple adjustment via LED bar graph and potentiometer
Response time: 12s max.
Switch on and off times: 2s typical
Output - PNP transistor; short-circuit proof; reverse polarity protected
Fluid temperature range: –25 to +80°C (100°C for 10 minutes max.)
M12, four-pin plug
Flow rates: 1 to 150cm/s (water); 3 to 300cm/s (oil); 2 to 30m/s (air)

//media.rs-online.com/t_line/L313242-01.gif
//media.rs-online.com/t_line/L3132447-25.gif
//media.rs-online.com/t_line/LD313242-02.gif
//media.rs-online.com/t_line/LI313242-02.gif
Specifikationer
Attribute Value
Maximum Flow Rate 1 → 150 (Water) cm³/s, 3 → 300 (Oil) cm³/s
Electrical Connection M12 Connector
Control Output PNP
Mounting Style Compact
Supply Voltage 21 → 26 V dc
Display Screen LED
Pipe Diameter Range 1/2 in
Minimum Operating Temperature -25°C
Maximum Operating Temperature +80°C
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 979,95 kr
(exkl. moms)
3 724,94 kr
(inkl. moms)
Enheter
Per unit
1 +
2 979,95 kr
Related Products
Fluid passes through internal flow straighteners, to stabilize ...
Description:
Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
SMC series AS*002F, in-line type, compact speed controllers ...
Description:
SMC series AS*002F, in-line type, compact speed controllers with built in one-touch fittings minimize installation time, reduce mounting height, and enable a more compact machine design. These speed controls can be mounted in 4 variations (direct mounting, L-bracket mounting, DIN ...
This multi-range radial flow, hall-effect turbine flow meter ...
Description:
This multi-range radial flow, hall-effect turbine flow meter uses a low inertia turbine supported on robust sapphire bearings, in a chemically resistant housing. This Turbine flow meter uses Hall Effect sensing so that opaque fluids may still be metered. For ...