Nylon V floatswitch with gasket,25VA N/O

  • RS-artikelnummer 338-9766
  • Tillv. art.nr RSF53Y100RC
  • Tillverkare / varumärke Cynergy3
Lagstiftning och ursprungsland
COO (Country of Origin): GB

Cynergy3 RSF50 Series Float Switches

Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.
There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.
The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:
RSF53 (black) - Nylon
RSF54 (opaque) - Polypropylene (WRAS approved)
RSF56 (grey) - Polyphenylene Sulphide (PPS)
RSF57 (green) - Polyvinylidene Fluoride (PVDF)
RSF58 (white) - Polypropylene (UL approved)
Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?
The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?
RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.


Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Supplied with

epoxy sealed leadouts


  • The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Attribute Value
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Nylon
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF50
25 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
171,61 kr
(exkl. moms)
214,51 kr
(inkl. moms)
Per unit
1 - 4
171,61 kr
5 - 9
166,40 kr
10 +
160,87 kr
Related Products
A reusable, compact leak detection switch that is ...
A reusable, compact leak detection switch that is ideal for use with double wall tanks, containment sumps and double wall pipes. The LS-10 uses dry switching for increased reliability and is easy to clean and reinstall after being triggered. The ...
Professional range of LS-750 series level switches from ...
Professional range of LS-750 series level switches from Gems Sensors. The LS-750 series level switches provide liquid level detection for a wide variety of applications and are ideal for use in oils and water. The level switches are designed with ...
Reliable & robust mercury-free Sump Float switch designed ...
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...
Side mounting switches consisting of a reed switch ...
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...