- RS-artikelnummer:
- 104-597
- Tillverkare / varumärke:
- RS PRO
1270 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 10)
14,431 kr
(exkl. moms)
18,039 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
10 - 90 | 14,431 kr | 144,31 kr |
100 - 490 | 13,051 kr | 130,51 kr |
500 - 2490 | 11,356 kr | 113,56 kr |
2500 - 4990 | 9,715 kr | 97,15 kr |
5000 + | 8,15 kr | 81,50 kr |
- RS-artikelnummer:
- 104-597
- Tillverkare / varumärke:
- RS PRO
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- KR
Produktdetaljer
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Specifikationer
Attribute | Value |
---|---|
Voltage Rating | 14 V |
Lamp Base | E5 |
Current Rating | 50 mA |
Diameter | 5.7мм |
Lamp Size | T1 1/2 |
Length | 17.5 mm |
Lens Colour | Clear |
Luminosity | 3 lm |
Life Hours | 1000h |