RS Components
Vår webbplats använder cookies och liknande teknik för att ge bättre service vid sökning och vid beställning, för analytiska ändamål och för att kunna anpassa vår marknadsföring till dig.
 
Sök efter P/N

96 Way Double Sided DIN 41612 Extender Board Adapter Extender board FR4 281.6 x 233.4 x 1.6mm


5 I lager för leverans inom 1 arbetsdagar
Add to Basket

Pris (ex. moms) Each

4 425,45 kr

(exkl. moms)

5 531,81 kr

(inkl. moms)

Enheter

Lagt till varukorgen

RS-artikelnummer:
100-4378
Tillverkare / varumärke:
RS PRO
COO (Country of Origin):
GB
EnheterPer unit
1 +4 425,45 kr

Eurocard extensions


Range of extensions for testing single- or double-height Eurocards, depth 160 or 220 mm, with type B or C DIN 41612 connectors.
The ejector mechanism situated at the front supports the board under test.
The board circuits are thus entirely clear of the chassis, considerably facilitating their inspection and verification.
To facilitate fixing of oscilloscope probes, the extension boards can be fitted with terminals (single boards are supplied with 20terminals and doubles with 40).
This option is not available on extensions with 96 // 96 contacts.


PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

AttributeValue
TypeExtender board
ConnectionDIN 41612
Number of Contacts96
Base MaterialEpoxy Glass Fabric Laminate
Number of Sides2
Dimensions281.6 x 233.4 x 1.6mm
Copper Thickness35µm
FR Material GradeFR4
Length281.6mm
Thickness1.6mm
Width233.4mm