Stego Elektrotechnik, Enclosure Thermostat, Adjustable, NO, DIN Rail, 250 V ac

  • RS-artikelnummer 743-1290
  • Tillv. art.nr 01116.0-00
  • Tillverkare / varumärke STEGO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Stego Compact Click Dial Thermostats

Stego STO 011 / STS 011 series compact thermostats are two state regulators with small hysteresis and high switching capacity. The setting thumbwheel has an anti frost assurance whilst the housing ensures an optimized air circulation around the bimetal. The STO 011 (stock no. 743-1296) thermostat (normally closed) is a contact breaker for regulating heaters. The STS 011 (stock no. 743-1290) thermostat (normally open) is a contact maker for regulation of filter fans and heat exchangers or for switching signal devices when temperature limits have been exceeded.

Switch temperature difference: 4K (±3K tolerance)
Sensor element: thermostatic bimetal
Contact type: snap-action contact
Service life: <100,000 cycles
Max. switching capacity: 250 V ac, 10 (2) A; 120 V ac, 15 (2) A; 30 W dc at 24V dc to 72 V dc
Max. inrush current: 16 A ac for 10 sec.
Connection: 2-pole terminal for 2.5mm² (AWG 13), torque 1Nm max.
Mounting: clip for 35mm DIN rail, EN 60715
Casing: plastic according to UL94 V-0, light grey
Dimensions: 70 x 33 x 42mm
Weight: approx. 50g
Fitting position: variable
Operating / Storage temperature: -45 °C to +80 °C (-49 to +176°F)
Operating / Storage humidity: max. 90% RH (non-condensing)
Protection type: IP20

Specifikationer
Attribute Value
Adjustable or Fixed Adjustable
Mount Type DIN Rail
Maximum Temperature Setting +60°C
Minimum Temperature Setting 0°C
Supply Voltage 250 V ac
Switch Configuration NO
141 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
Tidigare 284,25 kr
237,61 kr
(exkl. moms)
297,01 kr
(inkl. moms)
Enheter
Per unit
1 - 4
237,61 kr
5 - 11
233,00 kr
12 - 24
222,22 kr
25 - 49
217,68 kr
50 +
207,19 kr
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting platePTC technology with ...
Tamperproof thermostats are pre-set and cannot be tampered ...
Description:
Tamperproof thermostats are pre-set and cannot be tampered with, so it is impossible to have the incorrect setting. Installation is simple and quick by screw terminals (up to 2,5mm²) and using a din-rail clip feature. Two (dual) tamperproof thermostats in ...
Vigirex relays with associated toroid sensors measure the ...
Description:
Vigirex relays with associated toroid sensors measure the leakage current in an electrical installation to detect levels that may be damaging. Ideal for protection or alarming, the products offer multiple setting and mounting possibilities. For use on low-voltage AC installations ...