Fluorescent Emergency Lighting Batten 70 W

  • RS-artikelnummer 743-4857
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

RS PRO 230 V IP65 Emergency Non-Corrosive Fluorescent Fittings

The TR65EMHF range of corrosion resistant T8 fluorescent battens are available in either single or twin battens. This range of high-frequency T8 Corrosion Resistant Luminaires are emergency maintained with 3-hour duration and are suitable for the most demanding environments, such as multi-storey car parks and workshops. This type of lighting is ideal for providing illumination in large areas.

In the event of an emergency, our RS PRO range of emergency lighting which also includes LED, twin-spots and bulkheads mean that you have the right lighting to illuminate exits. The whole range is RS approved meaning that they are great value for money and high quality you can rely on.
This range includes the following battens:
712-6954 - Fluorescent Emergency Lighting Batten 36 W
712-6963 - Fluorescent Emergency Lighting Batten 2 x 36 W
712-6972 - Fluorescent Emergency Lighting Batten 2 x 58 W
712-6979 - Fluorescent Emergency Lighting Batten 58 W
743-4851 - Fluorescent Emergency Lighting Batten 2 x 70 W
743-4857 - Fluorescent Emergency Lighting Batten 70 W

Features and Benefits:

High-frequency control gear
Energy saving
Flicker-free
Instant start
Longer lamp life
Polycarbonate body and clips, stainless steel clips available separately
High impact resistant polycarbonate prismatic diffuser
IP65 suitable for indoor and outdoor use
Fully resistant to the penetration of dust and water jets
Stainless steel clips are available as accessories, please see link

Typical Applications:

These fittings are suitable for indoors and outdoor applications, providing lighting in large ares such as:
Multi-storey car parks
Warehouses

FAQs
What is the difference between maintained and non-maintained emergency lighting?
Maintained emergency lighting's purpose is to be lit continuously and will stay lit when there is a power failure or an emergency such as a fire. A maintained emergency light will allow the pathways or areas to be permanently illuminated and usually helps guide people to exit signs and safety. Sometimes these types of lighting solutions can double up as a normal light fitting.
Non-maintained emergency lighting has been designed to switch on in the instance of an emergency or power outage to help provide lighting to people who need to make their way to an exit or to follow an escape route. This kind of lighting solution provides a battery backup light source.

Why is Emergency Lighting so important?
It is essential that all occupied buildings should have escape lighting to allow for safe exit should mains power fail. Emergencies luminaires have fitted back up batteries which are continuously charged during standard operation and have at least 3 hours of power. Lights must be installed to provide sufficient illumination according to the different areas of premises and must conform to the latest legislation.

Note

Not supplied with T8 fluorescent lamps, see accessory link for suitable products.

Emergency Light Fittings

There are two basic types of emergency lighting luminaires - maintained and non-maintained.
Maintained, these luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs. The maintained luminaires also have the facility of being switched in banks of up to ten units.

Non-maintained, these luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switchrooms and storage areas.

Specifikationer
Attribute Value
Maintained Maintained
Length 1.87 m
Width 95 mm
Depth 100 mm
Duration 3h
Fitting Type Batten Light Fitting
Wattage 70 W
Lamp Type Fluorescent
Lamp Supplied No
Voltage Rating 230 V
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 505,10 kr
(exkl. moms)
1 881,38 kr
(inkl. moms)
Enheter
Per unit
1 +
1 505,10 kr
Related Products
A versatile, slim shaped bulkhead luminaire providing emergency ...
Description:
A versatile, slim shaped bulkhead luminaire providing emergency lighting solutions with quick and simple installation and minimum maintenance. Suited to a variety of applications including offices, hotels, bars and cafes. The fitting can be used as a back-lit or edge-lit ...
A versatile, slim shaped LED downlighter luminaire providing ...
Description:
A versatile, slim shaped LED downlighter luminaire providing emergency lighting solutions with quick and simple installation and minimum maintenance. Suited to a variety of applications including offices, hotels, bars and cafes. The fitting can be used as a back-lit or ...
Start Waterproof, integrated LED weatherproof luminaire, with UV ...
Description:
Start Waterproof, integrated LED weatherproof luminaire, with UV stabilized flat diffuser and linear prisms designed to achieve uniform lit appearance, optimise light output and to reduce glare, stainless steel diffuser clips and fixing brackets for surface mounting. Polycarbonate housing, Polycarbonate ...
This IP20 rated emergency 3 hour switchable maintained ...
Description:
This IP20 rated emergency 3 hour switchable maintained LED Exit sign features powder coated white mild steel body, with 20mm cable entries BESA box fixings. This LED emergency exit sign offers an energy saving and cost effective solution to fulfil ...