1601N Safety Edge Profile, Protected Area 1m, RHT Wire Lead

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Safedge Profiles

The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.
It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.
The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.
It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.
A range of accessories for end termination and 90° active corner joints are also available.

2 different profile designs
Conductive rubber technology
Available in 1m, 1.5m or 2m lengths
Aluminium mounting rail
The system has a bend radius of 200mm
Rubber boot optional
Active corners
IP65 protection

Note

These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive.

//media.rs-online.com/t_line/L249600-01.gif

Safety Edge

Specifikationer
Attribute Value
Range Safedge
Protected Area 1m
Length 43mm
Series 440-F
Width 28.5mm
Profile 1601N
Terminal Type RHT Wire Lead
Material EPDM, NBR/CR
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 896,36 kr
(exkl. moms)
2 370,45 kr
(inkl. moms)
Enheter
Per unit
1 +
1 896,36 kr
Related Products
STAR-GAP snap ferrite sleeves feature a pre-fixing and ...
Description:
STAR-GAP snap ferrite sleeves feature a pre-fixing and cable protection system allowing for quick and easy assembly. A low reduction of impedance is ensured by the low magnetic saturation of the material in high DC current applications.These ferrite sleeves are ...
The Trojan™ 5 Safety Switches are universal tongue ...
Description:
The Trojan™ 5 Safety Switches are universal tongue (or key operated) operated interlock switches which are fitted to the leading edge of sliding, hinged or lift-off guards. These safety interlock switches have dual key entry slots and rotatable heads, movable ...
The Kobra INCH series from IDEM are tongue ...
Description:
The Kobra INCH series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...