0110N Safety Edge Profile, Protected Area 2m, SET Wire Lead

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): PL
Produktdetaljer

Safedge Profiles

The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.
It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.
The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.
It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.
A range of accessories for end termination and 90° active corner joints are also available.

2 different profile designs
Conductive rubber technology
Available in 1m, 1.5m or 2m lengths
Aluminium mounting rail
The system has a bend radius of 200mm
Rubber boot optional
Active corners
IP65 protection

Note

These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive.

//media.rs-online.com/t_line/L249600-01.gif

Allen Bradley Guardmaster Safety Edge Profile

The Mobrey Integral ultrasonic level sensor switch is intended for level detection at a fixed point when liquid fills the gap between the crystals. It has polyphenylene sulphide construction and two open-drain FET transistors (one conducting when the sensor is wet and the other conducting when the sensor is dry) output type. This switch It has electric voltage ranging between 18VDC/AC and 30VDC/AC.

Note:
If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.

Features and Benefits

• The system has a bend radius of 200mm
• Rubber boot optional
• Active corners

Applications

• Power-operated doors
• Guided vehicles
• Moving machinery beds

Certifications

• IP65 protection

Safety Edge

Specifikationer
Attribute Value
Range Safedge
Protected Area 2m
Series 440-F
Length 24.5mm
Width 28.5mm
Profile 0110N
Terminal Type SET Wire Lead
IP Rating IP67
Material EPDM, NBR/CR
4 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 453,35 kr
(exkl. moms)
3 066,69 kr
(inkl. moms)
Enheter
Per unit
1 +
2 453,35 kr
Related Products
The Trojan™ 5 Safety Switches are universal tongue ...
Description:
The Trojan™ 5 Safety Switches are universal tongue (or key operated) operated interlock switches which are fitted to the leading edge of sliding, hinged or lift-off guards. These safety interlock switches have dual key entry slots and rotatable heads, movable ...
The Kobra INCH series from IDEM are tongue ...
Description:
The Kobra INCH series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key ...
The Kobra Hygiecam series from IDEM are tongue ...
Description:
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key ...
2 N/O instantaneous outputs provide stop category 0, ...
Description:
2 N/O instantaneous outputs provide stop category 0, 3 N/O timed contacts provide stop category 1 by allowing controlled deceleration of the motor until a complete stop is achieved4 solid state outputs for PLC signallingMonitored start button featureDelay time: 0 ...