Surface Mount Ducted Fan, 100mm

  • RS-artikelnummer 884-0988
  • Tillv. art.nr SDX100
  • Tillverkare / varumärke Vent-Axia
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Vent-Axia EuroSeries® (SDX) In-Line Centrifugal Duct Fans

The Vent-Axia SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor to ensure a compact design, high performance and low sound levels.

The in-line fan casing is constructed from pressed steel and incorporates an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit whilst maintaining minimum noise levels. All models are supplied with a simple mounting foot for ease of installation.

The SDX range is available in three model sizes: 100, 150 and 315mm diameter as standard performance. The range provides a performance up to 0.372m³/s with a maximum pressure development of 500 Pa.The SDX range is suitable for the extract of clean air only. It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc.

The impellers are aerodynamically designed centrifugal backward curved type, manufactured by injection moulding of a polypropylene resin. The motor and impeller is factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.

All units are fitted with motors protected to IP44, insulation Class B and are suitable for temperatures ranging from -25°C to +60°C with humidity levels of up to 95% RH ensuring reliable operation. All sizes are for a 220V/1/50Hz electrical supply and incorporate a manual reset thermal protection device.

Choice:
884-0988: Euro Series SDX 100 (100mm)
884-0982: Euro Series SDX 150 (150mm)
884-0991: Euro Series SDX 315 (315mm)

Available in sizes 100, 150 and 315 mm
Motor Insulation Class B, protected to IP44
Operating Temperatures from -25°C up to +60°C
All units suitable for speed control
Quality Assurance to BS EN ISO 9001:1994
Performance tested to BS848 Part 1 1980

Approvals

BS848 Part 1 1980

Wall / Ceiling Extractor Fans

Specifikationer
Attribute Value
Air Flow 212m³/h
Duct Diameter 100mm
Mounting Surface Mount
Special Features Four Sealing Rings, Weather Tight Fit
Series Euro
Termination Type Quick Connect
Configuration Rectangular
11 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 751,34 kr
(exkl. moms)
2 189,18 kr
(inkl. moms)
Enheter
Per unit
1 +
1 751,34 kr
Related Products
With high static pressure, Blowers are suitable for ...
Description:
With high static pressure, Blowers are suitable for cooling equipment with high system impedance and high heat generation such as servers, storage systems, and base stations. No External Duct Required to Change Wind DirectionsBlowers send out air in a 90° ...
Professional range of Ametek industrial regenerative blowers that ...
Description:
Professional range of Ametek industrial regenerative blowers that provide quiet, maintenance free, oil free operations. Air and other gases are drawn into the blower via the inlet ports on the impeller blades. Rugged Aluminiun housingCarbon Steel ShaftRemovable cast iron flanges. ...
A range of industrial cooling fans designed to ...
Description:
A range of industrial cooling fans designed to provide high volumes of air.The fan casing is formed from heavy gauge rolled sheet steel with the motor support manufactured from steel rod and electro-welded for increased strength. The fan assembly is ...
Centrifugal fan suitable for wall, ceiling or ducted ...
Description:
Centrifugal fan suitable for wall, ceiling or ducted applications. Stylish design blends in with modern decor. Surface or flush mountingIntergral back draught shutterLubricated for life motor with thermal cut outClip-off front coverTimer model allows the fan to run on; can ...