Wago, 264, 600 V Standard Din Rail Terminal

  • RS-artikelnummer 484-3895
  • Tillv. art.nr 264-721
  • Tillverkare / varumärke Wago
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

264 Miniature Series

Front-entry miniature screwless DIN Rail terminals are designed for snap-mounting onto symmetrical DIN Rail 467-349. The terminals have a clamp design that ensures the clamping force automatically adjusts to the size of the connector. Thus resulting in a corrosion-free contact area, and compensates for any deformation of the conductor due to cold flow or settling of strands.

Features and Benefits

• Available in 3 colours
• Moulded in modified nylon 6.6 (free from halogen)
• Self-extinguishing according to UL94-V2
• Temperature stabilised allowing continuous operation at 105°C (170°C short term) according to IEC216 part 1 and 2
• Terminals interlock and are designed to prevent reverse mounting
• 24.5 mm Depth
• Rated at 600 V (UL)
• The green/yellow earth terminal blocks connect directly to the mounting rail

Note

To ensure a high level of safety and security it is essential that only 1 conductor is inserted in each terminal. However, when jumper bars are used to common terminals a conductor of not more than 1.5mm² may be inserted between the jumper and the outer edge of the terminal block

Approvals

UL recognised component, CSA certified, DEMKO (except 264-727), KEMA, SEMKO.

//media.rs-online.com/t_line/L460418-02.gif
Specifikationer
Attribute Value
Series 264
Wire Size 0.08 → 2.5 mm²
Cable CSA 0.08 → 2.5mm²
Current Rating 20A
Voltage Rating 600 V
Pitch 10mm
1360 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 10)
9,36 kr
(exkl. moms)
11,70 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
10 - 190
9,36 kr
93,60 kr
200 - 490
8,892 kr
88,92 kr
500 +
8,423 kr
84,23 kr
Related Products
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
An additional selection of 2.5 and 4mm² terminals ...
Description:
An additional selection of 2.5 and 4mm² terminals in useful colours including the newphase colours black, brown and grey, as well as white, orange, yellow and red. Identify signals or voltages easilyTerminal colours match incoming cables, reducing wiring errorThree phase ...
Low voltage dropSecurely mounts on Top hat rail ...
Description:
Low voltage dropSecurely mounts on Top hat rail with internal spring footPartitions fit between terminals and can be broken down by hand to suitYellow safety covers clip into partitions.
Triple decker for improved connection density in sensor/actuator ...
Description:
Triple decker for improved connection density in sensor/actuator appplicationsAll levels can be cross connected using Jumper Bar 3 in 1 out design makes providing common potentials simple24V PNP/NPN versions have internally connected red LED All three levels can accommodate 5mm ...