Senaste sökningar

    Siemens SITOP PSE200U Selectivity Module DIN Rail Power Supply 22 → 30V dc Input, 24V dc Output, 10A

    RS-artikelnummer:
    769-7361
    Tillv. art.nr:
    6EP1961-2BA41
    Tillverkare / varumärke:
    Siemens
    Siemens
    Se alla DIN Rail Power Supplies
    Tillfälligt slut i lager restorder för leverans 2022-11-14
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    1 375,66 kr

    (exkl. moms)

    1 719,58 kr

    (inkl. moms)

    EnheterPer unit
    1 +1 375,66 kr

    Alternativ

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

    Siemens PSE200U Series Selectivity Module, 22 → 30V, 10A, for use with SITOP
    RS-artikelnummer
    714-1268

    Pris (ex. moms) Each

    1 375,66 kr

    (exkl. moms)

    1 719,58 kr

    (inkl. moms)

    RS-artikelnummer:
    769-7361
    Tillv. art.nr:
    6EP1961-2BA41
    Tillverkare / varumärke:
    Siemens
    COO (Country of Origin):
    AT

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    AT

    Produktdetaljer

    SITOP PSE200U Selectivity Module


    The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
    The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
    The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.


    Features and Benefits:


    • Reliable shutdown in case of overload regardless of cable lengths or cable cross-sections

    • 4 load feeders per module with individually adjustable maximum current for each output

    • Two versions for remote diagnostics: Group signaling contact or single-channel signalling

    • Evaluation via free-of-charge SIMATIC S7 function blocks (S7-1500/1200/300/400) for modules with single-channel signaling (PSE200U)

    • LEDs for rapid on-site fault localization

    • Remote reset possible from a central location (PSE200U)

    • Simple commissioning thanks to manual switch on/off of outputs (PSE200U)

    • Sequential connection of feeders to reduce total inrush current

    • Sealable transparent cover over adjusters for currents and times protects against maladjustment (PSE200U)


    Advantages of a selectivity module


    A power supply unit (PSU) cannot guarantee a fault-free supply when used on its own. The selectivity module offers reliable detection of overload or short-circuit in the circuit. A selectivity module enables reliable shutdown in case of overload regardless of cable lengths or cross-sections.


    Approvals

    CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS

    Siemens DIN Rail Power Supply, 99% Efficiency, 4 x Output Terminals - SITOP Series - 6EP1961-2BA41


    Energise devices in your industrial application with this single-phase DIN rail power supply from Siemens. It's used to provide a steady 24V DC to voltage-sensitive components. The unit has four terminals, so you can use it to power multiple pieces of equipment simultaneously. Thanks to an adjustable potentiometer on each output terminal, you have the flexibility to choose the amount of current, ranging between 3 and 10A, that best suits your device. An internal 5A fuse ensures your loads remain protected from damage due to voltage surges. You'll find supplies like this commonly used in robotics and automation systems.


    • DIN rail mounting for easy tool-free installation
    • Operating temperature range between 0°C and +60°C for use in harsh environments
    • 99% efficiency ensures a constant supply of the rated output voltage to connected loads
    • LED signalling for at-a-glance checking of the device's operating status
    • Dimensions of 80 (height) x 72 (width) x 72mm (depth) to take up minimal space on your rail


    What's the lifespan of this device?


    This device has an expected mechanical service life of over 540,000 hours, so you can be sure of reliable long-term performance.



    Specifikationer

    AttributeValue
    AC or DC Input Voltagedc
    AC or DC Output Voltagedc
    Input Voltage22 → 30V dc
    Output Voltage24V dc
    Output Current10A
    Number of Outputs4
    TypeSelectivity Module
    Height80mm
    Standards MetCE, CSA Certified, UL
    SeriesSITOP PSE200U
    Width80mm
    Hazardous Area CertificationATEX
    Mounting TypeDIN Rail Mount
    Depth72mm
    MTBF540979h
    Efficiency99%
    Minimum Temperature-25°C
    Maximum Temperature+60°C
    Tillfälligt slut i lager restorder för leverans 2022-11-14
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    1 375,66 kr

    (exkl. moms)

    1 719,58 kr

    (inkl. moms)

    EnheterPer unit
    1 +1 375,66 kr

    Alternativ

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

    Siemens PSE200U Series Selectivity Module, 22 → 30V, 10A, for use with SITOP
    RS-artikelnummer
    714-1268

    Pris (ex. moms) Each

    1 375,66 kr

    (exkl. moms)

    1 719,58 kr

    (inkl. moms)