Senaste sökningar

    Siemens SITOP PSE202U Redundancy Module Dual Redundancy Module 24V dc Input, 24V dc Output, 10A

    RS-artikelnummer:
    769-7355
    Tillv. art.nr:
    6EP1964-2BA00
    Tillverkare / varumärke:
    Siemens
    Siemens
    Se alla DIN Rail Power Supplies
    7 I lager för avsändande samma dag
    2 Inom 1 arbetsdag(ar) (UK lager)
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    597,18 kr

    (exkl. moms)

    746,48 kr

    (inkl. moms)

    EnheterPer unit
    1 +597,18 kr
    RS-artikelnummer:
    769-7355
    Tillv. art.nr:
    6EP1964-2BA00
    Tillverkare / varumärke:
    Siemens
    COO (Country of Origin):
    AT

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    AT

    Produktdetaljer

    SITOP Accessories


    Mounting Bracket


    Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for control cabinets with a depth of 320 mm or more.


    Mounting Adapter for Standard Mounting Rail


    The single phase 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 PSUs are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails.

    A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail EN 60715 35 x 15 is separately available as an accessory.

    The 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0 and 6ES7307-1KA02-0AA0 PSUs are variants for SIMATIC S7-300 and can be mounted on S7 rails.

    A mounting adapter (6EP1971-1BA00) for installation on DIN Rail EN 60715 35´15/7.5 is separately available as an accessory.


    Connection Plug for Devices with Degrees of Protection IP65 and IP67


    For the maintenance free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection. A connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory.


    Device Labels


    Blank device labelling plates (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.



    Specifikationer

    AttributeValue
    Input Voltage24V dc
    Output Voltage24V dc
    Output Current10A
    Number of Outputs1
    TypeRedundancy Module
    Height80mm
    Depth100mm
    Width80mm
    SeriesSITOP PSE202U
    Maximum Temperature+70°C
    Minimum Temperature-20°C
    7 I lager för avsändande samma dag
    2 Inom 1 arbetsdag(ar) (UK lager)
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    597,18 kr

    (exkl. moms)

    746,48 kr

    (inkl. moms)

    EnheterPer unit
    1 +597,18 kr