DIN Rail Enclosure Box, PCB Matrix Type

  • RS-artikelnummer 426-301
  • Tillverkare / varumärke Entrelec
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR
Produktdetaljer

DIN Rail Mounting Component Box System

DIN rail mounting component boxes with screw terminal connections. A matrix type PCB is available, for each size box, with connections to all terminals. Typical applications include: PCB relays and associated circuitry, opto-isolators and other signal interfacing.

The Standard size box is made up using a mid-section with 4 screw terminals on each side, and two end covers. Shallow and deep end covers are available for fitting to either side, the latter being used to provide clearance for tall components.
The Large sized box is available as a kit, which comprises of a mid-section, with 6 terminals on each side, and two shallow end covers.
The base fitting is the same as on Universal DIN rail mounted terminals and therefore can be mounted on asymmetric or symmetric mounting rail. They also accept the same terminal markers.
The Matrix type PCB’s have a standard 0.1 inch (2.54 mm) pitch and a .041 inch (1.05 mm) dia. hole.

Left and right end covers are available for this range, please see RS Stock No. 829-5571 for the left end plate and RS Stock No. 828-9490 forthe right end plate

Compatible Mounting Rails

32mm Asymmetric: 467-365

230 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
59,678 kr
(exkl. moms)
74,598 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 +
59,678 kr
298,39 kr
Related Products
Polyester distribution box in black for use in ...
Description:
Polyester distribution box in black for use in Ex area zone 1.In the lower part of the housing, the narrow sides hold threaded bushes for attaching terminal rails or mounting plates.Unused cable guides must be sealed with dummy screws (supplied). ...
Select insulation housing a) with Faston type terminals ...
Description:
Select insulation housing a) with Faston type terminals for soldering (version 1) or b) with Faston type terminals for plug-in technology (version 2)Wire fixing: terminal screws M3.5Housing secured by: snap-on attachment on top-hat rails DIN EN 50 022 or screw ...
Select insulation housing a) in accordance with DIN ...
Description:
Select insulation housing a) in accordance with DIN 43880 (version 1) b) with Faston type terminals for machine solderingCable fixing: undetachable +/- terminal screws M3.5Housing secured by: snap-on attachment on top-hat rails DIN EN 50 022 or screw fixings M4, ...
These compact terminals from Phoenix Contact allow for ...
Description:
These compact terminals from Phoenix Contact allow for complex switching tasks in confined spaces. Mounted on TS15 RS 467-349. These terminals have a pitch of just 4.2mm. End clamp is available to purchase separately. • Screw connection• Space saving• Mount ...