MCP4251-104E/P, Digital Potentiometer 100kΩ 257-Position Linear 2-Channel Serial-SPI 14-Pin PDIP

  • RS-artikelnummer 723-9731
  • Tillv. art.nr MCP4251-104E/P
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

MCP413x/415x/423x/425x Digital Potentiometers

The Microchip MCP413x, MCP415x, MCP423x and MCP425x range of devices are Digital Potentiometers that feature a SPI interface. On board is volatile RAM memory.

7-bit (129 steps) and 8-bit (257 steps) versions are available in various RAB resistance options from 5 kΩ to 100 kΩ. Further variants also give the choice between Rheostat and Potentiometer pinouts, Single and Dual Resistor Network options are also available.

Features

Zero Scale to Full-Scale Wiper Operation
Low Wiper Resistance: 75 Ω (typical)
Low Temperature Coefficient: Absolute (Rheostat) 50 ppm, Ratiometric (Potentiometer) 15 ppm (typical)
SPI Serial Interface
Resistor Network Terminal Disconnect Feature
Brown-Out Reset Protection: 1.5 V (typical)
Serial Interface Inactive Current: 2.5 μA (typical)
High-Voltage Tolerant Digital Inputs: Up to 12.5 V
Supports Split Rail Applications
Internal Weak Pull-Up on all Digital Inputs
Wide Operating Voltage: 1.8 V to 5.5 V
Wide Bandwidth (-3 dB) Operation: 2 MHz for 5.0 kΩ device (typical)

Model Variants

Potentiometer Wiper Configuration: MCP4131, MCP4151, MCP4231, MCP4251
Rheostat Wiper Configuration: MCP4132, MCP4152, MCP4232, MCP4252

Single Resistor Network: MCP4131, MCP4132, MCP4151, MCP4152
Dual Resistor Network: MCP4231, MCP4232, MCP4251, MCP4252

7-bit, 128 Resistors (129 steps): MCP4131, MCP4132, MCP4231, MCP4232
8-bit, 256 Resistors (257 steps): MCP4151, MCP4152, MCP4251, MCP4252

Digital Potentiometer - Microchip

Specifikationer
Attribute Value
Control Interface Serial-SPI
Resistance Value 100kΩ
Number of Positions 257
Taper Type Linear
Memory Type Volatile
Number of Pots per Package 2
Mounting Type Through Hole
Package Type PDIP
Pin Count 14
Power Supply Type Single
Typical Single Supply Voltage 1.8 to 5.5 V
Dimensions 0.4 x 0.28 x 0.195in
Height 4.95mm
Maximum Operating Temperature +125 °C
Width 0.28in
Minimum Operating Temperature -40 °C
Length 10.16mm
Tillfälligt slut i lager – restorder för leverans 2021-01-22
Pris (ex. moms) Each (In a Pack of 2)
8,115 kr
(exkl. moms)
10,144 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
2 - 8
8,115 kr
16,23 kr
10 - 22
7,755 kr
15,51 kr
24 - 98
7,34 kr
14,68 kr
100 +
6,93 kr
13,86 kr
Förpackningsalternativ:
Related Products
The ADuCM360 is a 3.9kSPS, 24-bit data acquisition ...
Description:
The ADuCM360 is a 3.9kSPS, 24-bit data acquisition system that incorporates dual multichannel sigma-delta (Σ-Δ) analogue-to-digital converters (ADCs), an ARM Cortex-M3 core processor and memory on a single chip. The ADuCM361 has a single ADC. 2 x 24-bit multichannel Σ-Δ ...
MCP45HV51 is a single-channel, high voltage digital potentiometer ...
Description:
MCP45HV51 is a single-channel, high voltage digital potentiometer (Digipot) family that supports 10V ∼36V or +/-5V to +/-18V power rails. It features 8-bit resolution with I2C interface. This family is available in TSSOP-14 and QFN-20 (5x5) packages and has 5kΩ, ...
AD5280: 1 channelAD5282: 2 channels256 positions+10 V to ...
Description:
AD5280: 1 channelAD5282: 2 channels256 positions+10 V to +15 V single supply, ±5.5 V dual-supply operationFixed terminal resistance: 20 kΩ, 50 kΩ, 200 kΩLow temperature coefficient: 30 ppm/°CPower-on midscale preset1Programmable resetOperating temperature: −40°C to +85°CI2C-compatible ...
Single-channel, 1024-/256-position resolution20 kΩ, 50 kΩ and 100 ...
Description:
Single-channel, 1024-/256-position resolution20 kΩ, 50 kΩ and 100 kΩnominal resistanceMaximum ±1% nominal resistor tolerance error50-times programmable (50-TP) wiper memoryRheostat mode temperature coefficient: 5 ppm/°C2.7 V to 5.5 V single-supply operation±2.5 V to ±2.75 V dual-supply operation for ac or bipolar ...