ISL90727WIE627Z-T7A, Digital Potentiometer 10kΩ 128-Position Serial-I2C 6 Pin, SC-70

  • RS-artikelnummer 193-1541
  • Tillv. art.nr ISL90727WIE627Z-T7A
  • Tillverkare / varumärke Renesas Electronics
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

The Intersil ISL90727 and ISL90728 are digitally controlled potentiometers (XDCP™). Each device consists of a resistor array, wiper switches, and a control section. The wiper position is controlled by an I2 C Bus™.
The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the SDA and SCL inputs.

Volatile Solid-State Potentiometer
I2C Serial Bus Interface
DCP Terminal Voltage, 2.7V to 5.5V
Low Tempco
Rheostat - 45 ppm/°C Typical
Divider - 15 ppm/°C Typical
128 Wiper Tap Points
Wiper Resistance 70Ω Typ at VCC = 3.3V
Low Power CMOS
Active Current, 200μA Max
Standby Current, 500nA Max
Available RTOTAL Values = 50kΩ, 10kΩ
Power-on Preset to Midscale
Packaging
6 Ld SC-70
Pb-Free

Specifikationer
Attribute Value
Control Interface Serial-I2C
Resistance Value 10kΩ
Number of Positions 128
Memory Type Volatile
Number of Pots per Package 1
Mounting Type Surface Mount
Package Type SC-70
Pin Count 6
Power Supply Type Single
Typical Single Supply Voltage 2.7 → 5.5 V
Dimensions 2.15 x 1.35 x 1mm
Height 1mm
Width 1.35mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Length 2.15mm
250 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
15,53 kr
(exkl. moms)
19,41 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 - 5
15,53 kr
77,65 kr
10 - 20
13,214 kr
66,07 kr
25 - 45
12,946 kr
64,73 kr
50 - 95
12,718 kr
63,59 kr
100 +
10,216 kr
51,08 kr
Förpackningsalternativ:
Related Products
The AD823x devices are integrated signal conditioning blocks ...
Description:
The AD823x devices are integrated signal conditioning blocks for ECG and other biopotential measurement applications. They are designed to extract, amplify and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote ...
2.7V to 3.3V Single-Supply OperationWide Spurious-Free Dynamic Range: ...
Description:
2.7V to 3.3V Single-Supply OperationWide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHzFully Differential Outputs for Each DAC±0.5% FSR Gain Mismatch±0.2° Phase MismatchLow-Current Standby or Full-Shutdown ModesInternal 1.2V Low-Noise Bandgap ReferenceSmall 28-Pin QSOP Package ApplicationsArbitrary Waveform ...
The Microchip MCP48FVB01/02 family are 8-bit voltage output ...
Description:
The Microchip MCP48FVB01/02 family are 8-bit voltage output Digital-to-Analogue Converters (DACs) that offer high performance with low power consumption and fast settling time. Featured on-board is Volatile Memory and a SPI Interface that supports write commands up to 20 MHz ...
The Silicon Labs C8051F02x are highly integrated mixed-signal ...
Description:
The Silicon Labs C8051F02x are highly integrated mixed-signal microcontrollers (MCU) with two separate high-speed ADC subsystems. Their two separate 12-bit DACs, on-chip VDD monitor, Watchdog Timer and clock oscillator combine to make the C8051F02x devices standalone System-on-Chip solutions.Enable, disable and ...