MCP4661T-502E/ML, Digital Potentiometer 5kΩ 257-Position Log 2-Channel I2C 16-Pin QFN

  • RS-artikelnummer 177-2861
  • Tillv. art.nr MCP4661T-502E/ML
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

The MCP466X devices are dual channel, non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP466X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. It is useful for equipment that requires factory trimming or recalibration. The MCP466X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Dual Resistor Network
Potentiometer or Rheostat configuration options
Resistor Network Resolution
8-bit: 256 Resistors (257 Steps)
RAB Resistances options of:
5kΩ
10kΩ
50kΩ
100kΩ
Zero-Scale to Full-Scale Wiper operation
Low Wiper Resistance: 75Ω (typ.)
Low Tempco:
Absolute (Rheostat): 50 ppm typical(0°C to 70°C)
Ratiometric (Potentiometer): 15 ppm typical
I2C™Compatible Serial interface
100 kHz
400 kHz
3.4 MHz

Specifikationer
Attribute Value
Control Interface I2C
Resistance Value 5kΩ
Number of Positions 257
Taper Type Log
Memory Type Non-Volatile
Number of Pots per Package 2
Mounting Type Surface Mount
Package Type QFN
Pin Count 16
Power Supply Type Single
Dimensions 4 x 4 x 0.95mm
Height 0.95mm
Minimum Operating Temperature -40 °C
Width 4mm
Length 4mm
Automotive Standard AEC-Q100
Maximum Operating Temperature +125 °C
Tillfälligt slut i lager – restorder för leverans när den finns i lager
Pris (ex. moms) Each (On a Reel of 3300)
6,987 kr
(exkl. moms)
8,734 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
3300 +
6,987 kr
23 057,10 kr
Related Products
MCP45HV51 is a single-channel, high voltage digital potentiometer ...
Description:
MCP45HV51 is a single-channel, high voltage digital potentiometer (Digipot) family that supports 10V ∼36V or +/-5V to +/-18V power rails. It features 8-bit resolution with I2C interface. This family is available in TSSOP-14 and QFN-20 (5x5) packages and has 5kΩ, ...
256-positionEnd-to-end resistance: 5 kΩ, 10 kΩ, 50 kΩ, ...
Description:
256-positionEnd-to-end resistance: 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩCompact SOT-23-8 (2.9 mm ´ 3 mm) packageSPI-compatible interfacePower-on preset to midscaleSingle supply: 2.7 V to 5.5 VLow temperature coefficient: 45 ppm/°CLow power, IDD = 8 μAWide operating temperature: –40°C to ...
256-position digital potentiometerTwo-time programmable (TTP) set-and-forget resistance setting ...
Description:
256-position digital potentiometerTwo-time programmable (TTP) set-and-forget resistance setting allows second-chance permanent programmingUnlimited adjustments prior to one-time programming (OTP) activationOTP overwrite allows dynamic adjustments with user-defined preset2.5 kΩ, 10 kΩ, 50 kΩ, 100 kΩend-to-end ...
Single-channel, 1024-/256-position resolution20 kΩ, 50 kΩ and 100 ...
Description:
Single-channel, 1024-/256-position resolution20 kΩ, 50 kΩ and 100 kΩnominal resistanceMaximum ±1% nominal resistor tolerance error50-times programmable (50-TP) wiper memoryRheostat mode temperature coefficient: 5 ppm/°C2.7 V to 5.5 V single-supply operation±2.5 V to ±2.75 V dual-supply operation for ac or bipolar ...