Development Kit RS232 Isolator for use with Galvanic Isolation of RS232 Signal

  • RS-artikelnummer 184-0862
  • Tillv. art.nr MIKROE-2864
  • Tillverkare / varumärke MikroElektronika
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

RS232 Isolator click is a fully isolated dual transceiver click, used to provide secure and easy UART to RS232 conversion, with the galvanic isolation. The digital input and output signals are transmitted across the isolation barrier by utilizing the analogue Devices proprietary iCoupler® technology - IC scale transformer windings couple the digital signals magnetically, from one side of the barrier to the other, providing the galvanic isolation and transfer rates up to 460Kbps.

2.5 kV fully isolated (power and data) RS-232 transceive
isoPower integrated, isolated dc-to-dc converter
Operational from single 3.3 V or 5 V supply
460 kbps data rate
2 ´ Tx and 2 ´ Rx channels
Meets EIA/TIA-232E specifications
ESD protection to IEC 61000-4-2 on RINx and TOUTx pins
Contact discharge: ±8 kV
Air gap discharge: ±15 kV
0.1 μF charge pump capacitors
High common-mode transient immunity: >25 kV/μs
Operating temperature range: −40°C to +85°C
44-ball chip scale package ball grid array (CSP_BGA)
Isolated RS-232 interface
High noise data communications
Industrial communications
Industrial/telecommunications diagnostic ports
Medical equipment

Specifikationer
Attribute Value
Accessory Type RS232 Isolator
For Use With Galvanic Isolation of RS232 Signal
8 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
568,70 kr
(exkl. moms)
710,88 kr
(inkl. moms)
Enheter
Per unit
1 +
568,70 kr
Related Products
Full support for Vivado and Petalinux design environments667 ...
Description:
Full support for Vivado and Petalinux design environments667 MHz Cortex-A9 processor with tightly integrated Xilinx FPGA (option between Dual Core and Single Core options)512 MB DDR3 memoryArduino shield and Pmod connectors for add-on hardware devicesUSB and Ethernet connectivityLarge array of ...
Small size, low cost 16x4 pixels IR array ...
Description:
Small size, low cost 16x4 pixels IR array Easy to integrate Industry standard four lead TO39 package Factory calibrated infrared temperature measurement. Calibration parameters stored in EEPROM. Noise Equivalent Temperature Difference (NETD) 0.20K RMS @4Hz refresh rate I2C compatible digital ...
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 ...
Description:
Integrated 19-mΩ and 9.4-mΩ MOSFETsSelectable FSW of 400 kHz, 800 kHz and 1.2 MHzAdjustable Current Limit Settings with Hiccup Restart0.6 V ±1% Reference Voltage Across Full Temperature RangeOptional External 5-V Bias Support for Enhanced EfficiencyD-CAP3™ Control Mode for Fast Transient ...
Reduces External Components and Total CostNo Schottky-Synchronous OperationInternal ...
Description:
Reduces External Components and Total CostNo Schottky-Synchronous OperationInternal Compensation for Any Output VoltageBuilt-In Soft-StartAll-Ceramic Capacitors, Compact LayoutReduces Number of DC-DC Regulators to StockWide 4.5V to 60V InputAdjustable 0.9V to 0.9 x VIN Output100kHz to 2.2MHz Adjustable Switching ...