Recom RO, Vout 5 V dc, Vin 12V, Vin 0V 200 mA DC/DC-omvandlare 1 W -40 °C 85 °C Genomgående hål
- RS-artikelnummer:
- 672-8782P
- Tillv. art.nr:
- RO-1205S
- Tillverkare / varumärke:
- Recom
Mängdrabatt möjlig
Antal 5 enheter (levereras i ett rör)*
360,10 kr
(exkl. moms)
450,10 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 3 enhet(er) från den 16 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 5 - 9 | 72,02 kr |
| 10 - 24 | 69,89 kr |
| 25 - 49 | 67,54 kr |
| 50 + | 65,41 kr |
*vägledande pris
- RS-artikelnummer:
- 672-8782P
- Tillv. art.nr:
- RO-1205S
- Tillverkare / varumärke:
- Recom
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Recom | |
| Utspänning 1 | 5 V dc | |
| Produkttyp | DC/DC-omvandlare | |
| Minsta ingångsspänning | 0V | |
| Maximal ingångsspänning | 12V | |
| Utström 1 | 200mA | |
| Utström 2 | 200mA | |
| Fästetyp | Genomgående hål | |
| Antal utgångar | 1 | |
| MTBF | 200000h | |
| Rippel och brus | 100mV Pk-Pk | |
| Utspänningsjusterområde | 0/12 V | |
| Antal stift | 6 | |
| Isolationsspänning | 1kV | |
| Kapseltyp | SIP | |
| Maximal uteffekt | 1W | |
| Vikt | 1.4g | |
| Standarder/godkännanden | RoHS | |
| Djup | 10mm | |
| Längd | 11.5mm | |
| Serie | RO | |
| Bredd | 10 mm | |
| Effektivitet | 80% | |
| Maximal arbetstemperatur | 85°C | |
| Minsta arbetsstemperatur | -40°C | |
| Välj alla | ||
|---|---|---|
Brand Recom | ||
Utspänning 1 5 V dc | ||
Produkttyp DC/DC-omvandlare | ||
Minsta ingångsspänning 0V | ||
Maximal ingångsspänning 12V | ||
Utström 1 200mA | ||
Utström 2 200mA | ||
Fästetyp Genomgående hål | ||
Antal utgångar 1 | ||
MTBF 200000h | ||
Rippel och brus 100mV Pk-Pk | ||
Utspänningsjusterområde 0/12 V | ||
Antal stift 6 | ||
Isolationsspänning 1kV | ||
Kapseltyp SIP | ||
Maximal uteffekt 1W | ||
Vikt 1.4g | ||
Standarder/godkännanden RoHS | ||
Djup 10mm | ||
Längd 11.5mm | ||
Serie RO | ||
Bredd 10 mm | ||
Effektivitet 80% | ||
Maximal arbetstemperatur 85°C | ||
Minsta arbetsstemperatur -40°C | ||
- COO (ursprungsland):
- TW
Recom 1W SIP Single Output Unregulated Isolated DC-DC Converter - RO Series
Unregulated outputs
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout
Note
MTBF to MIL-HDBK 217F
Operating temperature is without derating.
Operating temperature is without derating.
Standards
EN-60950-1
RECOM DC-DC Converter, Single Output, 1kV Isolation Voltage - RO Series - RO-1205S
Need to knock the voltage of a DC energy source down a notch or two? This DC-DC converter from RECOM is the answer. When supplied with 12V, it produces a 5V output with a 200mA current, so you can confidently power up compatible circuits. As it tips the scales at just 1.4g, it doesn't put a strain on your setup. You can even use it in challenging conditions, thanks to its broad operating temperature range between -40°C and +85°C.
• Maximum efficiency of 80% indicates it's an energy-saving component
• Isolated type to prevent noise and ensure reliable signal transfer
• Through-hole design to allow for secure mounting on your PCB
• Mean time between failure at +25°C is 98,500 hours, so it's a dependable choice
• 95% RH maximum operating humidity lets you use it in humid work areas
• Isolated type to prevent noise and ensure reliable signal transfer
• Through-hole design to allow for secure mounting on your PCB
• Mean time between failure at +25°C is 98,500 hours, so it's a dependable choice
• 95% RH maximum operating humidity lets you use it in humid work areas
Applications
• Small-scale electronic appliances
• Automotive sector
• Medical technology
• Automotive sector
• Medical technology
How big is this DC-DC converter?
This compact converter measures 11.5 (L) x 6 (W) x 10mm (H), so it doesn't take up much space on your PCB.