Electromen OY, DC Motor Controller, Potentiometer Control, 12 → 32 V dc, 8 A

  • RS-artikelnummer 510-1209
  • Tillv. art.nr EM174
  • Tillverkare / varumärke Electromen OY
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): FI
Produktdetaljer

PWM DC 8A 12-32Vdc

EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal can be used to give the speed control value. Rotation direction changes when control input value turns negative or if control input signal is applied to direction input.The unit has reference positive and negative signal for potentiometer use, i.e. the potentiometer can also be used to drive in both directions, the motor stops at potentiometer middle position. Set value range can be scaled to range trim.,During a direction change, the controller waits for motor to stop before driving in opposite direction. This avoids current peaks at direction change. The current limit can be set with a pot or direct voltage signal to protect the motor and mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V supply use.

Bi-directional
No brake
Controlled direction change +/-10v or 0-10v
Soft start ramp
Adjustable current limit
Load compensation (IR comp)

Specifikationer
Attribute Value
Supply Voltage 12 → 32 V dc
Current Rating 8 A
Voltage Rating 40 V
Control Input Potentiometer
Length 65mm
Width 73mm
Depth 30mm
Dimensions 65 x 73 x 30 mm
Operating Temperature Range -20 → +70 °C
15 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 546,66 kr
(exkl. moms)
1 933,32 kr
(inkl. moms)
Enheter
Per unit
1 +
1 546,66 kr
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. ...
Description:
Analog feedback5V, 10V or 4-20mA controlPosition accuracy max. 0,1%Solid state power stageSmall size, great performanceDigitally settable parametersVerstile dynamic settingsHousing options availablePwm Freq, 2/16kHz ( since prog. v1.3 )Improved accurate , parameter 17, prog. ( v1.4).
Compact non-isolated motor speed control modules for dc. ...
Description:
Compact non-isolated motor speed control modules for dc. shunt wound and permanent magnet field motors. DIN rail mountingSuitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsinkControl signals available for zero speed, drive health and speed trimAdjustable ...
This module is a 4-quadrant, linear output driver ...
Description:
This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and gear motors up to 60 watts. Only single polarity voltage supply is required to achieve bi-directional motor speed controlEmploys armature feedback technique to ...