Chauvin Arnoux PEL 103 Current, Energy, Frequency, Harmonics, Power, Voltage Data Logger

  • RS-artikelnummer 778-1034
  • Tillv. P01157153
  • Tillverkare / varumärke Chauvin Arnoux
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR

PEL103 Power Energy Logger (Unit Only)

The PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs.

• Triple digital display
• Suitable for use on single-phase, split-phase and three-phase installations
• Can be installed without cutting off the mains power supply
• Map the electrical consumption on a site
• Gain a real-time snapshot of consumption
• Analyse electrical network quality
• Record harmonics up to the 50th order with phase indication
• Record results to an SD card
• Real-time communication with a PC
• Data transfer and analysis with supplied PEL software

The PEL103 Logger is sold without sensors. Find the MN93A clamp 236-559 and the AmpFLEX™ A193-450 mm clamp 236-565 current sensors here, available separately.


IEC 61010 600 V CAT IV – 1,000 V CAT III

Supplied with

• 4 measurement leads (straight banana, 3 m long, black)
• 4 crocodile clips (black)
• 1 SD card (2 GB)
• 1 set of rings and inserts (for ends of leads and current sensors)
• 1 mains cable
• 1 USB cable (Type A, Type B)
• 1 Multifix mounting systems
• 1 operating manual (on CD)
• 1 bag
• 1 safety datasheet
• PEL Transfer PC software
• 1 quick start-up guide
• SD Card to USB adapter

Attribute Value
Measurement Parameters Current, Energy, Frequency, Harmonics, Power, Voltage
Sensor Type Current Sensor
Number of Input Channels 3, 4
Interface Type Bluetooth, Ethernet, USB
Maximum Voltage Measurement 1000V ac/dc
Power Source Mains
IP Rating IP54
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Maximum Current Measurement 5000 A dc, 10000 A ac
Display Type LCD
Dimensions 256 x 125 x 37mm
Best Current Measurement Accuracy ±0.5 %
Best Voltage Measurement Accuracy ±0.2 % + 0.5V
Includes Operating manual on CD, PEL Transfer PC software, Quick start-up guide, 1 bag, 1 mains cable, 1 safety datasheet, 1 SD card, 1 SD-USB adapter, 1 set of inserts/rings, 1 USB cable, 4 black crocodile clips, 4 x 3 m black silicone cables straight banana / straight banana
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
14 941,30 kr
(exkl. moms)
18 676,62 kr
(inkl. moms)
Per unit
1 +
14 941,30 kr
Nästa dag-leverans inte möjlig
Kalibrerade alternativ:
Related Products
Brought to you by Keysight, The 34970A DAQ ...
Brought to you by Keysight, The 34970A DAQ switch unit combines simplicity of user interface with low per-channel cost, modular flexibility and impressive measurement performance. Its versatility includes use as a data-logger, data acquisition front-end and switch system. It measures ...
3 measuring ranges (30A/300A/3000A AC) Simultaneous measurement on ...
3 measuring ranges (30A/300A/3000A AC) Simultaneous measurement on all 3 phases Over-range detection with LED Voltage output: 33,3mV/A 3,33mV/A and 0,333mV/A with 1% accuracy Wide frequency bandwidth: 10Hz to 8kHz Powered by rechargeable batteries or mains (with adapter supplied) Safety: ...
The TG-4100 is a submersible temperature data logger ...
The TG-4100 is a submersible temperature data logger with a built-in sensor. It can be submerged at depths up to 500 m for long periods. It monitors from -40 to +70°C. Its robust, high visibility bright yellow case has an ...
The new DAS240 and DAS240BAT (15 hour internal ...
The new DAS240 and DAS240BAT (15 hour internal battery) recorders have been designed to measure all parameters you can find in a process: voltage measurements, measurements on sensors (0-10V), temperature measurements (thermocouples, Pt100-1000), current measurements (with optional shunt), resistance measurements, ...