TE Connectivity D-sub Connector Backshell AMPLIMITE" Series Latching Block" , For use with

  • RS-artikelnummer 450-9371
  • Tillv. art.nr 745403-8
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): MX
Produktdetaljer

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

//media.rs-online.com/t_line/L270988-01.gif
//media.rs-online.com/t_line/L450920-01.gif
//media.rs-online.com/t_line/L450936-01.gif

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specifikationer
Attribute Value
Accessory Type Latching Block
For Use With 9 → 37 Way D-sub Connector
Series AMPLIMITE
33 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
32,88 kr
(exkl. moms)
41,10 kr
(inkl. moms)
Enheter
Per unit
1 - 9
32,88 kr
10 - 24
28,02 kr
25 - 49
24,71 kr
50 - 99
21,40 kr
100 +
19,65 kr
Related Products
A range of large crimp flanges for use ...
Description:
A range of large crimp flanges for use with TE Connectivity standard rail and Quick Lock all metal shielded back shells. For compatible hoods see typical part numbers 139-0759, 139-1679 and 139-0769. Crimp flanges, when used with appropriately sized crimp ...
All metal crimp barrels for use with large ...
Description:
All metal crimp barrels for use with large and small crimp flanges in the TE Connectivity rail and Quick Lock back shell series. See typical part number 139-1547 for large crimp flange range and 139-1556 for small crimp flange range. ...
Sealing flanges for use with D-sub connectors which ...
Description:
Sealing flanges for use with D-sub connectors which eliminate the need for secondary potting operations when sealing the connector to the panel. These D-sub connector sealing flanges are made from UL94-HB silicone rubber and are either removable or permanent. Part ...
D-Sub Hardware | d-sub connectorsSlide LocksScrew LocksDust CoversFlangesQuick ...
Description:
D-Sub Hardware | d-sub connectorsSlide LocksScrew LocksDust CoversFlangesQuick ReleaseD-Sub Hardware | BackshellsThumb ScrewsGrommetsMiscellaneous.