3M Ceramic Cutting Wheel, 230mm Diameter, 2.5mm Thick

  • RS-artikelnummer 910-7888
  • Tillv. art.nr 65471
  • Tillverkare / varumärke 3M
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): PL
Produktdetaljer

3M™ Cubitron™ II Cut-Off Wheel

3M™ Cubitron™ II Cut-Off disc contains 3M Precision Shaped Ceramic Grain are engineered to The cut-off discs surpass other discs in both performance and longevity, yielding 2 times more cuts than conventional cut off discs.

Outstanding Cutting Performance

These wheels contain 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging like traditional abrasives. These points continuously self sharpen as they fracture, generating an extremely fast cut. This reduces the heat build-up due to friction, decreasing heat-related stress cracks and discolouration.
Using the 3M™ Cubitron™ II Cut Off disc provides an extra sharp, quick cut that lasts much longer than other discs. Our cut off wheels is typically used for cutting through metals, such as stainless steel tubing, exhaust pipes, clamps and rusted fasteners.

Cut off wheels are attached to a cut off wheel tool (sold separately) and must always be used with a wheel guard for safety.

Features and Benefits

Engineered to cut faster and last longer than competitive ceramic products

3M Precision Shaped Grain is self-sharpening runs cool and optimises mineral breakdown for extra-long life

Rigid reinforced resin-bonded wheel slices through almost all materials

The wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used

Typical Applications

Cutting through metal, such as car body or tube and sheet cutting

Using on stainless steel, exhaust tube, rusted fasteners

FAQ's

Is there a difference between cutting and grinding discs?

Yes, the thickness of the discs are different, with cutting discs being thinner than grinding discs. Cuttings generally don't have adequate lateral strength for side grinding.

Can you use metal cutting discs on masonry applications?

No, masonry applications would need a separate disc. Metals cutting discs are usually made from aluminium oxide particles, while masonry cutting discs are made from silicon carbide.

Specifikationer
Attribute Value
Disc Diameter 230mm
Thickness 2.5mm
Abrasive Material Ceramic
Bore Size 22.23mm
Grit Size G36+
Maximum Safe Speed 6650rpm
Model 3M™ Cubitron™ II Cut-off Wheel
Series Cubitron™ II
Denna produkt har utgått
Related Products
3M™ Silver Cut Off disc is constructed using ...
Description:
3M™ Silver Cut Off disc is constructed using 3M Precision Shaped Ceramic Grain. It delivers an unbeatable combination of performance and value.They are specially put together to be used on metals. Cuts cleanly with minimal burrsCuts quickly through metal pipes, ...
3M™ Silver Cut Off disc is constructed using ...
Description:
3M™ Silver Cut Off disc is constructed using 3M Precision Shaped Ceramic Grain. It delivers an unbeatable combination of performance and value.They are specially put together to be used on metals. Cuts cleanly with minimal burrsCuts quickly through metal pipes, ...
The Scotch-Brite™ disc is a surface conditioning disc ...
Description:
The Scotch-Brite™ disc is a surface conditioning disc that combines an evenly abrasive and offers a high cut rate for a consistent finish. The non-woven disc uses aluminium oxide mineral abrasive offering a continuous fast cutting action and consistency. The ...
The Scotch-Brite™ Roloc™ disc is a surface conditioning ...
Description:
The Scotch-Brite™ Roloc™ disc is a surface conditioning disc that combines an aggressive abrasive and 3M™ Roloc™ quick-change attachment system. The non-woven disc use aluminium oxide mineral abrasive offering a continuous fast cutting action and consistency. The fibre construction conforms ...