Honeywell CSN Series Closed Loop Current Sensor, -60 → +60 mA, -70 → +70A output current

  • RS-artikelnummer 169-7653
  • Tillv. art.nr CSNA111
  • Tillverkare / varumärke Honeywell
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CN
Produktdetaljer

Honeywell CSN Series Hall Effect Current Sensor

The Honeywell CNS series of closed loop Hall-effect current sensors utilise the null balance or zero magnetic flux feedback method to provide accurate and repeatable measurements. The devices produce an output current which can be converted to a voltage by using a suitable load resistor.

• Measures AC, DC and impulse currents
• Lowest cost/performance ratio
• Rapid response, no overshoot
• High overload capacity
• High level of electrical isolation between primary and secondary circuits
• Operating temperature range 0 to 70 °C
• Small size and weight

Specifikationer
Attribute Value
Sensor Technology Closed Loop
Output Current Range -70 → +70A
Nominal Current -60 → +60 mA
Supply Voltage ±15 V
Mounting Type PCB Mount
Frequency Bandwidth DC to 150 kHz
Accuracy ±0.5 %
Series CSN
Minimum Operating Temperature 0°C
Maximum Operating Temperature +70°C
Depth 18mm
Height 25.7mm
Width 40.5mm
Tillfälligt slut i lager – restorder för leverans 2020-01-20
Pris (ex. moms) Each (In a Box of 30)
303,672 kr
(exkl. moms)
379,59 kr
(inkl. moms)
Enheter
Per unit
Per Box*
30 +
303,672 kr
9 110,16 kr
Related Products
Linear current sensors from Honeywell incorporating LOHET II ...
Description:
Linear current sensors from Honeywell incorporating LOHET II Hall effect transducers. These devices have increased temperature stability and 10 times less temperature drift than the LOHET I types and produce a ratiometric output voltage that varies from 19% to 81% ...
Compensated closed-loop Hall effect current transducers for the ...
Description:
Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents. Excellent dynamic performanceGood linearity and low temperature driftGalvanic isolation between input and measuring circuitPCB mountingBody material plastic to UL 94-V0.
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage ...
Description:
Single-pole Hall effect current transducersMeasurement of inserted conductorVoltage output, Vout = ±4VCapable of measuring complex signalsExcellent precision and good linearityLow temperature driftBody material Plastic; Polycarbonate PBTOperating Temperature Range -10 to +80°CSecondary connector: stock no. 543-7738.
Single-pole closed-loop current transducers based on the Hall ...
Description:
Single-pole closed-loop current transducers based on the Hall effect principleVoltage output3 different input ranges via selection pinsCompact format for mounting on p.c.b.Excellent precision and good linearityLow temperature driftBody material plastic to UL94-V0.