TE Connectivity AD Ratchet Crimping Tool for MiniSeal Splices

  • RS-artikelnummer 444-5693
  • Tillv. art.nr AD-1377CRMPTOL3CVT-CS2065
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

TE Connectivity Mil Spec AD-1377 Hand Crimping Tool for MiniSeal Splices

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

TE Connectivity MiniSeal Handing Crimping Tool - Overview

From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials which meets Mil Spec MIL-DTL-22520/37-01 for crimping MiniSeal crimp splices. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. A locator helps position the terminal accurately during the crimping process. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved.

Key Features and Benefits

• Easy to use with a smooth operation
• Meets Mil Spec MIL-DTL-22520/37-01 standard
• Pre-set crimp depth ensures crimp integrity
• Ratchet controlled release mechanism ensures full crimp cycle
• Locator for accurate contact positioning
• Crimping cavities are polished for maximum crimping reliability
• Ergonomic design for operator comfort

Questions and Answers

What terminals can this tool be used with?
This hand crimping tool is used for crimping MiniSeal splices with a wire size range of 26 AWG to 12 AWG

Standards

MIL-DTL-22520/37-01

Approvals

M22520/37-01

TE Connectivity Hand Crimp Tools for Splice Terminals

Specifikationer
Attribute Value
Series AD
Crimp Connector Type MiniSeal Splices
Crimp Tool Type Ratchet
For Use With Splices 10-22 AWG
Wire Size mm² 0.15 3.37mm²
74 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 102,24 kr
(exkl. moms)
2 627,80 kr
(inkl. moms)
Enheter
Per unit
1 +
2 102,24 kr
Related Products
A universal crimp tool frame with die sets ...
Description:
A universal crimp tool frame with die sets available separately for terminating AMP and Western Electric Style data plugs.Tool frame: (stock number 443-895) A ratchet action crimp tool frame with ratchet release and finger operated set screws for rapid location ...
The T9999 Molex ratchet crimp tool is a ...
Description:
The T9999 Molex ratchet crimp tool is a quality tool designed for crimping terminals. This Molex hand tool is designed for 26-32 AWG and provides you with an ergonomically designed grip for maximum comfort, making crimping effortless. Precise & user-friendly ...
The KAA-0760 ergonomic hand crimp tool is designed ...
Description:
The KAA-0760 ergonomic hand crimp tool is designed for crimping red, blue and yellow pre-insulated crimp terminals with wires of cross-section range from 0.5 to 6.0mm2. This ratchet hand crimp tool has asymmetric colour-coded die nests, a ratchet with safety ...
The ratchet is pre-set to a specific force ...
Description:
The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial ...