TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 3mm² to 6mm², 12AWG

  • RS-artikelnummer 465-665
  • Tillv. art.nr DR-4-50
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): MX
Produktdetaljer

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specifikationer
Attribute Value
Series DuraSeal
Insulation Insulated
Insulation Material Nylon
Inner Ring Diameter 4.3mm
Outer Ring Diameter 8mm
Minimum Wire Size mm² 3mm²
Maximum Wire Size mm² 6mm²
Minimum Wire Size AWG 12AWG
Maximum Wire Size AWG 10AWG
Stud Size M5
Colour Yellow
Contact Plating Tin
Contact Material Copper Alloy
Thickness 1.4mm
Overall Length 40mm
16350 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 50)
5,362 kr
(exkl. moms)
6,702 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
50 +
5,362 kr
268,10 kr
Related Products
DIAMOND GRIP STRATO-THERM high temperature ring tongue crimp ...
Description:
DIAMOND GRIP STRATO-THERM high temperature ring tongue crimp terminals with insulation support for use where operating temperatures prevent standard insulated crimps being used. These DIAMOND GRIP STRATO-THERM high temperature ring tongue crimp terminals are made from solid nickel, alumel or ...
SOLISTRAND ring crimp terminals designed to terminate solid ...
Description:
SOLISTRAND ring crimp terminals designed to terminate solid and stranded wire and irregular shaped conductors. The robust design of these SOLISTRAND ring terminals enables them to maintain their superior performance characteristics even when used in the most challenging of environments. ...
PIDG (Pre-Insulated Diamond Grip) ring tongue wire crimp ...
Description:
PIDG (Pre-Insulated Diamond Grip) ring tongue wire crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG ring tongue terminals consist of a precision-formed high conductivity copper body and barrel. Inside the barrel are serrations which ...
From RS PRO a high-quality insulated crimp ring ...
Description:
From RS PRO a high-quality insulated crimp ring terminal, also known as a ring connector or cable lug. Ring crimp terminals are used for connecting an electrical cable or wire to a stud or a post on an electrical component ...