Dormer Countersink Set x6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm6 Piece

  • RS-artikelnummer 812-6012
  • Tillv. art.nr G2363
  • Tillverkare / varumärke Dormer
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): SE
Produktdetaljer

Domer G2363 HSS TiAIN Countersink Set

Introducing the G2363 Countersink Set from Dormer is an essential accessory for any tradesman. Featuring six pieces to this set for various types of materials and when using screws, bolts or rivets they can provide a flush neat finish. Designed with three flutes per countersink to allow for a better chip clearance compared to four flutes to prevent any clogging from occurring. Every countersink is constructed from High-Speed Steel (HSS) providing exceptional hardness to prevent any wear hardness. In addition to the HSS, a TiAIN coating allows the countersink to maintain the high standard cutting at high temperatures. The coated bits can be operated at speeds up to 100% higher and for longer than uncoated countersink bits.

Features and Benefits

Includes six of the most popular sizes

For the production of 90° countersunk holes

Hex shank allows for high power transfer

Designed for use on a variety of materials (Wood, Plastic and Metals)

Triple flute design for efficient cutting

HSS and TiAIN coating increases hardness and high-temperature resistance

Manufactured to DIN 335C

Typical Applications

This Countersink Set is typically used by professional tradesmen, engineers or those wishing to finish off their project. These are commonly used to cut a hole to allow the head of a screw, bolt or rivet to sit flush or below the surface of the surrounding material. Most common countersink bits are the fluted countersink cutter, the angle of the flutes can vary for particular jobs. They are commonly used for:

Mechanical and industrial production

Woodworking/carpentry

Fastening wood to metal

Dormer G2363 Set Includes (Diameters)

6.3 mm

8.3 mm

10.4 mm

16.5 mm

20.5 mm

FAQ's

Can you use this with a power drill?

Yes, this can be used with both a power drill and a battery drill. It doesn’t have the right connection for an SDS drill.

Standards

DIN 335C

Specifikationer
Attribute Value
Head Diameter 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm
Drill Bit Type Countersink Set
Countersink Angle 90°
Number of Flutes 3
Material HSS
Number of Pieces 6
7 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 025,92 kr
(exkl. moms)
2 532,40 kr
(inkl. moms)
Enheter
Per unit
1 +
2 025,92 kr
Related Products
Countersink cutter drill bits are designed to fit ...
Description:
Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the ...
HSS-E countersink with cylinder shaftFor rust-free steels and ...
Description:
HSS-E countersink with cylinder shaftFor rust-free steels and + VA materialsThree cutters with radial rear vent for vibration-free workFor deburring, threading and weighting as per DIN 74.
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...