Advance Tapes AT526 Conductive Copper Tape, 10mm x 33m

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): IE
Produktdetaljer

Advance Tapes Copper Tapes

The Advance Tapes copper tape is a 35μ, coated with conductive acrylic adhesive supplied on a removable silicon liner. This tape is 0.06mm thick, 10mm wide and 33m long.
EMI/RFI shielding tapes:
When using this tape, galvanic compatibility should be taken into account.

Features and Benefits


Good high and low temperature resistance
• Easy unwind
• Can be easily soldered
• Superior shielding effectiveness
• Breaking load is 40N/cm
• Operating temperature ranges between -20°C and 155°C

Applications


Heating and ventilation
• Construction industry
• Manufacturing
• Duct sealing

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Specifikationer
Attribute Value
Total Thickness 0.06mm
Foil Thickness 0.035mm
Width 10mm
Length 33m
Conductivity Conductive
Adhesion Strength 4.5 N/cm
Adhesive Material Thermosetting Acrylic
Material Plating None
Tensile Strength 40N/cm
Maximum Temperature Resistance +155°C
Complies with EN Legislation BS EN 60454 - Part 2
Minimum Temperature Resistance -20°C
Model Number AT526
89 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) 1 Reel of 33 Metre(s)
491,56 kr
(exkl. moms)
614,45 kr
(inkl. moms)
Rulle(ar)
Per Reel
Per Metre*
1 +
491,56 kr
14,896 kr
Related Products
35 micron copper foil coated with a non-conducting ...
Description:
35 micron copper foil coated with a non-conducting thermosetting solvent based acrylic adhesive supplied on a removable silicone release liner. Non-conductive acrylic adhesiveGood high and low temperature resistanceCan be easily solderedEasy unwind.
35μ tin clad copper foil coated tape with ...
Description:
35μ tin clad copper foil coated tape with an electrically conductive acrylic adhesive supplied on a removable silicone liner. Resistant to oils,chemicals, water and ozoneGood solder ability.
50μ copper foil coated with a electrically conductive ...
Description:
50μ copper foil coated with a electrically conductive acrylic adhesive. 50μ thick copperGreater shielding effectivenessMeets requirements of EN 60454 - part 2 and Mil-T-47012.
A very specific strip tape based on a ...
Description:
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder ...