Advance Tapes AT525 Non-Conductive Copper Tape, 10mm x 33m

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Advance Tapes Copper Tapes

The Advance Tapes copper tape is a 35μ, coated with a non-conductive acrylic adhesive, supplied on a removable silicon liner. This tape is 0.07mm thick, 10mm wide and 33m long.
Note:
To prevent tarnishing, do not touch this tape with bare hands.

EMI/RFI shielding tapes:
When using this tape, galvanic compatibility should be taken into account.

Features and Benefits

• Adhesion strength is 4.5N/cm
• Good high and low temperature resistance
• Can be easily soldered
• Easy unwind
• Breaking load is 40N/cm
• Provides superior shielding effectiveness
• Operating temperature ranges between -20°C and 155°C

Applications


Heating and ventilation
• Construction industry
• Manufacturing
• Duct sealing

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Specifikationer
Attribute Value
Total Thickness 0.07mm
Foil Thickness 0.035mm
Width 10mm
Length 33m
Conductivity Non-Conductive
Adhesion Strength 4.5 N/cm
Adhesive Material Thermosetting Acrylic
Material Plating None
Tensile Strength 40N/cm
Maximum Temperature Resistance +155°C
Complies with EN Legislation BS EN 60454 - Part 2
Minimum Temperature Resistance -20°C
Model Number AT525
69 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
287,76 kr
(exkl. moms)
359,70 kr
(inkl. moms)
Enheter
Per unit
1 +
287,76 kr
Related Products
3M 1181 Tapes consists of a soft copper ...
Description:
3M 1181 Tapes consists of a soft copper foil backing and a unique electrically conductive pressure-sensitive acrylic adhesive. Smooth copper tapes, coated on one side with conductive acrylic adhesiveDesigned for electromagnetic or radio-electrical shielding applicationsHighly resistant to solvents, UV rays, ...
This 938A Embossed Copper Foil Tape from Hi-Bond ...
Description:
This 938A Embossed Copper Foil Tape from Hi-Bond features a conductive acrylic adhesive with a uniform dispersion of conductive particles. The embossed copper foil carrier is heat and cold resistant. Shielding or repair of signal cable Blinding the end of ...
The copper foil shielding tape 1194, has a ...
Description:
The copper foil shielding tape 1194, has a 1.4-mil smooth copper foil backing and a non-conductive acrylic pressure sensitive adhesive and liner. This makes them ideal for applications where a tape which does not drain the static charge to a ...
The 1345 type EMI shielding tape has a ...
Description:
The 1345 type EMI shielding tape has a 1.4-mil embossed tin plated copper foil backing with an acrylic pressure sensitive adhesive and liner. The embossing helps make an excellent contact through the adhesive. The tin plating helps with soldering and ...