Advance Tapes AT544 Conductive Tin Clad Copper Tape, 12mm x 33m

  • RS-artikelnummer 542-5381
  • Tillv. art.nr AT544
  • Tillverkare / varumärke Advance Tapes
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
COO (Country of Origin): IE
Produktdetaljer

AT544 35μ Tin Clad Copper Foil Masking Tape

A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder coating or spray painting.The masking tape is then removed to expose a clean and electrically contactable tin layer. This tin layer can then form a complete EMI shield contact with a suitable foam rubber door seal

Conductive acrylic adhesive
Good high and low temperature resistance
Easy unwind

Standards

Tested in accordnace with ASTM D-1000 latest issue, BS EN 60454/ Part 2 (1996)-formerly VDE 0340, B.S

Approvals

Conforms to Flame Retardant requirement part only of UL510

EMI/RFI Shielding Tapes

When using these tapes galvanic compatibility should be taken into account.

Specifikationer
Attribute Value
Total Thickness 0.06mm
Foil Thickness 0.035mm
Width 12mm
Length 33m
Conductivity Conductive
Adhesion Strength 5 N/cm
Adhesive Material Acrylic
Material Plating Tin
Tensile Strength 40N/cm
Maximum Temperature Resistance +155°C
Minimum Temperature Resistance -20°C
Complies with EN Legislation BS EN 60454 - Part 2
Model Number AT544
23 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) 1 Reel of 33 Metre(s)
2 193,94 kr
(exkl. moms)
2 742,42 kr
(inkl. moms)
Rulle(ar)
Per Reel
Per Metre*
1 +
2 193,94 kr
66,483 kr
Related Products
35 micron copper foil coated with a non-conducting ...
Description:
35 micron copper foil coated with a non-conducting thermosetting solvent based acrylic adhesive supplied on a removable silicone release liner. Non-conductive acrylic adhesiveGood high and low temperature resistanceCan be easily solderedEasy unwind.
This 720A Copper Foil Tape from Hi-Bond features ...
Description:
This 720A Copper Foil Tape from Hi-Bond features a conductive acrylic pressure sensitive adhesive with a uniform dispersion of conductive particles. The foil carrier is 25 microns thick, with an additional 40 micron-thick coating of acrylic adhesive containing nickel silver ...
This 740 Copper Foil Tape from Hi-Bond features ...
Description:
This 740 Copper Foil Tape from Hi-Bond features a conductive acrylic pressure sensitive adhesive with a uniform dispersion of conductive particles. The copper foil carrier is 35 microns thick, with an additional 30 micron-thick coating of acrylic adhesive containing nickel ...
This 938A Embossed Copper Foil Tape from Hi-Bond ...
Description:
This 938A Embossed Copper Foil Tape from Hi-Bond features a conductive acrylic adhesive with a uniform dispersion of conductive particles. The embossed copper foil carrier is heat and cold resistant. Shielding or repair of signal cable Blinding the end of ...