Schneider Electric Acti 9 iCT 4 Pole Contactor, 4NC, 63 A, 230 V ac Coil

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): FR
Produktdetaljer

Schneider Electric Acti 9 iCT Contactors

ACTi 9 iCT Contactors from Schneider Electric provides power switching in single phase 3 phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Impulse relay function
• Day-night function
• Class-2 insulation: continuous safety for operators and unqualified personnel

What is the difference between AC-7a and AC-7b when choosing a iCT contactor?

These utilization catagories determine what load the contactors are switching:
AC-7a are for slightly inductive loads for household appliances for example mixers and blenders
AC-7b are for motor-loads for house hold appliances such as fans and central vacuums

Do spacers have to be fitted between the iCT range of Contactors?

If several contactors are fitted onto an DIN Rail then spacers should be used after every second contactor. The reason for this is that with multiple contactors side by side there can be a very high build of heat causing the devices to reach above their operating temperature. The coils themselves are 100% rated so can be on for 24 hours a day and the heat needs to be dissipated, therefore a spacer is required

Specifikationer
Attribute Value
Coil Voltage 230 V ac
Number of Poles 4
Contact Current Rating 63 A
Range Acti 9
Series iCT
Normal State Configuration 4NC
Contact Voltage Rating 400 V ac
Terminal Type Screw
Maximum Operating Temperature +60°C
Width 85mm
Depth 68mm
Length 54mm
Minimum Operating Temperature -5°C
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 472,26 kr
(exkl. moms)
1 840,32 kr
(inkl. moms)
Enheter
Per unit
1 +
1 472,26 kr
Related Products
Allen-Bradley Bulletin 100-K miniature contactors are designed for ...
Description:
Allen-Bradley Bulletin 100-K miniature contactors are designed for commercial and light industrial applications where panel space is at a premium. These miniature devices, while 45 mm wide, are shallower and have less panel depth requirements than standard IEC contactors.The miniature ...
Electric motor sizes are increasing, especially in applications ...
Description:
Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical ...
The 3RT2 contactors are climate-proof and are suitable ...
Description:
The 3RT2 contactors are climate-proof and are suitable and tested for use worldwide, sizes S00 to S2, up to 37 kW. Size S00, up to 7.5 kWSize S0, up to 18.5 kWSize S2, up to 37 kWScrew connection / Spring ...
Centralised control auxialiary for Legrand step relay. Can ...
Description:
Centralised control auxialiary for Legrand step relay. Can be associated with a signaling auxiliary. Must be mounted on the left side of a step relay. Simultaneous control of several step relayFitted for 230 Vac Legrand step relay.