Schneider Electric Tesys D LC1D 3 Pole Contactor, 3NO, 115 A, 55 kW, 24 V dc Coil

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Schneider Electric LC1D TeSys D Contactors

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1D115BD Contactor

The Schneider Electric LC1D115BD model is a 3 pole contactor featuring a 24 V dc operating coil, with an AC-3 full load current rating of 115 A.

Specifikationer
Attribute Value
Coil Voltage 24 V dc
Number of Poles 3
Contact Current Rating 115 A
Power Rating 55 kW
Range TeSys D
Series LC1D
Normal State Configuration 3NO
Contact Voltage Rating 1 kV ac
Number Of Auxiliary Contacts 2
Terminal Type Screw
Width 120mm
Minimum Operating Temperature -5°C
Depth 132mm
Maximum Operating Temperature +60°C
Length 158mm
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
5 431,68 kr
(exkl. moms)
6 789,60 kr
(inkl. moms)
Enheter
Per unit
1 +
5 431,68 kr
Related Products
Electric motor sizes are increasing, especially in applications ...
Description:
Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical ...
Utilisation category AC3415 Vac switching voltagePole Contact Composition: ...
Description:
Utilisation category AC3415 Vac switching voltagePole Contact Composition: 3 NOAuxiliary Contacts: 1 N/O + 1 N/C.
Utilisation category AC1Auxiliary contact configuration one N/O, one ...
Description:
Utilisation category AC1Auxiliary contact configuration one N/O, one N/CWidth of LC1D contactors is 45mmClosing time of LC1D series is 12-22ms, opening time is 4-19msThese contactors must not be used with TeSys overload relays, interconnection units or GV2 circuit breakers.
Contactors have a switching voltage of 440Vac and ...
Description:
Contactors have a switching voltage of 440Vac and a coil consumption (ac coils 50 / 60Hz rated) of 4.5VA (Hold in) and 30VA (inrush). Utilisation category AC3DIN rail or screw mountingAmbient air temperature range -25 to +50°C.