Schneider Electric TeSys K LP4K 3 Pole Contactor, 3NO, 12 A, 5.5 kW, 24 V dc Coil

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Schneider Electric LP4K TeSys K Miniature Contactors

TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP4K range are low consumption DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. The TeSys K contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all devices in the range to have the same physical size and panel footprint for convenience.

Features and Benefits

• Built-in auxiliary contacts for added switching capability • Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Coil with rectifier incorporated
• Easily installed accessories
• Instantaneous auxiliary contact
• Flexible control circuit to suit a wide range of applications
• High-fault short circuit current ratings provide the flexibility to select any component

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Are the TeSys K contactors suitable for applications in AC4 usage?

The LP4K series is suitable up to a maximum of 440 V ac in category AC4.

Is the TeSys K range a double break pole type contactor?

Yes the TeSys K range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LP4K1210BW3 Miniature Contactor

The LP4K1210BW3 is a miniature 3 pole low consumption contactor featuring a 24 V dc operating coil, an AC-3 full load current of 12 A and a normally open auxiliary contact.

Schneider Electric K Range Special Purpose

Specifikationer
Attribute Value
Coil Voltage 24 V dc
Number of Poles 3
Contact Current Rating 12 A
Power Rating 5.5 kW
Range TeSys K
Series LP4K
Normal State Configuration 3NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 1
Terminal Type Screw
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Length 58mm
Depth 57mm
Width 45mm
11 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
508,57 kr
(exkl. moms)
635,71 kr
(inkl. moms)
Enheter
Per unit
1 +
508,57 kr
Related Products
Silent mini-contactors for controlling AC-3 or 20 A, ...
Description:
Silent mini-contactors for controlling AC-3 or 20 A, AC-1 motors.Recommended for use in noise-sensitive areas, and in high-interference network environments. Coil with integrated rectifier, anti-interference.Mounted on 35 mm DIN rail or Ø 4 mm screw pitch.
Professional range of WEG contactors from the CWC ...
Description:
Professional range of WEG contactors from the CWC Series designed for switching of electric motors. The contactors are modular and compact but at the same time robust and highly reliable. Built and tested according to IEC/EN60947 and DIN VDE 0660. ...
One N/O auxiliary contactSwitching category AC2; AC3Coil nominal ...
Description:
One N/O auxiliary contactSwitching category AC2; AC3Coil nominal power: 3.5VA, 3.5W (closing and holding)Make/break times: 14 to 26//16 to 40ms.
Three main polesOne N/O auxiliary contactFront and side ...
Description:
Three main polesOne N/O auxiliary contactFront and side mounted auxiliary contact blocksLocation for surge protectionDIN rail and back plate mountingManufactured to IEC947-4-1, EN60 047-4-1CE marked.