Schneider Electric TeSys F LC1F 3 Pole Contactor, 3NO, 115 A, 55 kW

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

Schneider Electric Contactors - LC1D TeSys D Series

Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• North American and International terminal markings • Panel mounted with supplied screws
• Bidirectional peak limiting diode suppressor to protect the coil
• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

Applications:

• Industrial control systems
• Switching contractors or relay coils
• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation, and maintenance

The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?

Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Note

For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Approvals

CSA, ASE, MENKO, DEMKO, SEMKO

Schneider Electric LC1F115 Contactor

The LC1F115 model is a coil less 3 pole contactor that offers long mechanical and electrical life and a consistent low-voltage architecture to ensure safe and reliable operation. The LC1F115 offers an AC-3 full load current rating of 115 A.

Specifikationer
Attribute Value
Number of Poles 3
Contact Current Rating 115 A
Power Rating 55 kW
Range TeSys F
Series LC1F
Normal State Configuration 3NO
Contact Voltage Rating 1 kV ac
Terminal Type Screw
Length 162mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -5°C
Depth 171mm
Width 163.5mm
7 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 822,44 kr
(exkl. moms)
4 778,05 kr
(inkl. moms)
Enheter
Per unit
1 +
3 822,44 kr
Related Products
Silent mini-contactors for controlling AC-3 or 20 A, ...
Description:
Silent mini-contactors for controlling AC-3 or 20 A, AC-1 motors.Recommended for use in noise-sensitive areas, and in high-interference network environments. Coil with integrated rectifier, anti-interference.Mounted on 35 mm DIN rail or Ø 4 mm screw pitch.
Professional range TeSys LC1D AC3 contactors. Typical application ...
Description:
Professional range TeSys LC1D AC3 contactors. Typical application includes resistive loads and motor control. All models are highly reliable and excellent quality. 3 PoleDIN Rail mountScrew mount terminalsIP20 front face.
Utilisation category AC3415 Vac switching voltagePole Contact Composition: ...
Description:
Utilisation category AC3415 Vac switching voltagePole Contact Composition: 3 NOAuxiliary Contacts: 1 N/O + 1 N/C.
TeSys changeover contactors fitted with two Everlink power ...
Description:
TeSys changeover contactors fitted with two Everlink power terminals, with hexagon socket-head screw connection.Allows for a single piece starter assembly with an Everlink breaker (vertical or side by side assembly).