Schneider Electric Overload Relay NO/NC, 7 → 10 A, 10 A

Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR

Schneider Electric | TeSys LRD Series | Thermal Overload Relays

The TeSys LRD series from Schneider Electric is a range of thermal overload relays with manual or automatic reset from 0.1 to 150 A and 0.06 to 75 kW providing greater automation control. Offering safe and effective protection LRD overload relays are reliable, covering the whole range of motor ratings up to 150A. If you are looking for an extremely compact starter they can be combined with TeSys D contactors. Designed for simple installation via screw clamp terminals, spring terminals, ring terminals or EverLink terminals, they also feature an integrated manual-automatic reset.

What is EverLink technology?
A removable terminal block, contactors and circuit-breakers can be linked without and accessory, vertically. On the same rail wiring can be connected in less than a minute. Reducing heat loss at connection points and without creep this technology provides quality wiring, continuity of service, fast assembly and reduced dimensions.

Features and Benefits:

• Pre-wiring kit
• Remote electrical, manual and automatic reset
• Terminal block for separate mounting
• Sealable flap
• Resistance to vibration & temperature cycling

Compatible contactor series:

Protection ratings & Safety features:

• TH conforming to IEC 60068
• IP20 conforming to IEC 60529
• ATEX D 94/9/CE, EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508 and
CSA C22.2 No 14 standards
• ATEX INERIS, BV, CCC, CSA, DNV, GL, GOST, LROS (Lloyds register of shipping), RINA and UL certification
• Vibrations 6 Gn IEC 60068-2-6
• Shocks 15 Gn for 11 ms IEC 60068-2-7

Applications - Industry, infrastructure, building, other applications include:
• Standard motor protection
• Line protection
• Protection: motor overload, stalling, loss of phase

Attribute Value
FLC Motor Rating 7 → 10 A
Contact Current Rating 10 A
Pole Configuration 3P
Range TeSys
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series LRD1
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Terminal Type Screw
Reset Method Automatic, Manual
Width 45mm
Length 123mm
Depth 66mm
Minimum Operating Temperature -20°C
Operating Temperature Range -20 → +60 °C
Maximum Operating Temperature +60°C
90 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
510,80 kr
(exkl. moms)
638,50 kr
(inkl. moms)
Per unit
1 - 9
510,80 kr
10 - 14
490,06 kr
15 +
468,83 kr
Related Products
Professional range of WEG contactors from the CWC ...
Professional range of WEG contactors from the CWC Series designed for switching of electric motors. The contactors are modular and compact but at the same time robust and highly reliable. Built and tested according to IEC/EN60947 and DIN VDE 0660. ...
Can be used with all motors equipped with ...
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
Suitable for machine protection requirements where machinery may ...
Suitable for machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure1 N/O and 1 N/C contactLED status indication: Voltage, Starting, Steady State, Overload, TripTrip status monitored: Over-Current, Rotor Locked, ...
Manual or automatic re-settings availableDirect mounting on BF09 ...
Manual or automatic re-settings availableDirect mounting on BF09 - BF38 contactorsRated insulation voltage Ui: 690VFrequency limit 0-400HzOperating temperature -25 to +60°CCan be mounted on contactor or seperatelyTest button - trip indicator.