Schneider Electric Control Relay 2NO/2NC, 10 A

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Schneider Electric | TeSys K Series | Control Relays

Creating seamless integration in all automation applications, compactness ratio and high performance, the TeSys K series is a range of reversing or non-reversing contactors. All 4 pole relays have 10A thermally rated contacts which are suitable for AC or DC control voltages. In addition the series also features low consumption coil versions with built in suppression which are suitable to be used with programmable controllers.

Features and Benefits:

• Common options available for all 6, 9, 12 A ratings
• AC and DC Control circuits available
• Low-consumption DC and silent
• Variety of auxiliary contacts, and timer modules
• Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available
• Consistent connection tightness
• Power consumption for Vac types 4.5 VA
• Power consumption for Vdc types 2.4 W
• Resistance to vibration & temperature cycling
• Din or screw fixing

Protection ratings & Safety features:

• BS 5424, IEC 60947, NF C 63-140 and VDE 0660 standards
• CSA and UL certification
• IP2x protection
• TC conforming to IEC 60068

Applications - Ideal for Zones sensitive to noise, disturbed mains supplies, industry, building and infrastructure. Other applications include:
• Switching contactor or relay coils
• Powering control and signalling equipment
• Simple control systems

Note

Relays are positively guided.

Specifikationer
Attribute Value
Contact Current Rating 10 A
Range TeSys K
Contact Voltage Rating 690 V ac
Mounting Style DIN Rail Mount, Screw Mount
Series CA3KN
Normal State Configuration 2NO/2NC
Terminal Type Screw
Width 45mm
Length 58mm
Depth 57mm
Minimum Operating Temperature -25°C
Operating Temperature Range -25 → +50 °C
Maximum Operating Temperature +50°C
72 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
310,83 kr
(exkl. moms)
388,54 kr
(inkl. moms)
Enheter
Per unit
1 - 9
310,83 kr
10 - 14
298,21 kr
15 +
285,29 kr
Related Products
For use with PLC output. Has LED indicator ...
Description:
For use with PLC output. Has LED indicator and supression incorporated (1.8W) and wide range coil 0.7 - 1.3 x rated. voltage. Utilisation category AC-1= 20AScrew clamp connectionDimensions (H x W x D) 58 x 45 x 57mm.
The 3RT Range of Siemens Contactors. All models ...
Description:
The 3RT Range of Siemens Contactors. All models are highly reliable and extremely good quality. Screw ConnectionAll models vary with Current rating and Voltage.Various NO/NC Values.
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
Suitable for machine protection requirements where machinery may ...
Description:
Suitable for machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure1 N/O and 1 N/C contactLED status indication: Voltage, Starting, Steady State, Overload, TripTrip status monitored: Over-Current, Rotor Locked, ...