3M 3342 Series, Jack Screw Mounting Kit for use with D-sub Connector

  • RS-artikelnummer 120-8407
  • Tillv. art.nr 3342-2
  • Tillverkare / varumärke 3M
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

Mounting Kits

These 3M Jack Screws are #4-40 UNC for both male and female (where applicable) threads.

3M jack screw kits containing 2 of each item (S=short or L=long hex heads)
For coupling IDC cable mount D connectors to corresponding panel mounting connectors
3505-62 (50-way latching bracket) enables rapid connection/disconnection of 50-way metal backshell stock no. 163-1605

Note

Screw kits are supplied in packs of 2 (price quoted is for 2), except stock no. 448-5584 where packs contain two long (19mm) and two (10mm) screws. See ’dimensions’ table for screw types and lengths. For type 3342-3 see stock no. 448-5584 . For bulk packs of 3341-1L and 3341-S see stock numbers 749-4702 and 749-4711 respectively.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specifikationer
Attribute Value
Type Jack Screw Mounting Kit
Overall Length 18.4mm
For Use With D-Sub Connector
Series 3342
242 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
27,12 kr
(exkl. moms)
33,90 kr
(inkl. moms)
Enheter
Per unit
1 - 14
27,12 kr
15 - 99
25,69 kr
100 - 249
23,97 kr
250 - 499
22,96 kr
500 +
21,95 kr
Relaterte Produkter
From Deutsch, this plastic panel nut is for ...
Description:
From Deutsch, this plastic panel nut is for use with the HDP20 range of connectors. Sealed to IP67Durable – 100 mating cycles minimumVibration proof – 20g's at 10 - 2000HzCorrosion Resistant – 48hours Salt Spray to MIL STD 1344.
A range of Quick Lock pin sets for ...
Description:
A range of Quick Lock pin sets for use with TE Connectivity Quick Lock full metal D-Sub miniature back shells. The variant A kits are intended for use with fixed female screw locks, pins are mounted in existing M3 or ...
Stainless steel jackscrew and jackposts used for locking ...
Description:
Stainless steel jackscrew and jackposts used for locking coupled Micro D connectors. Suitable for both metal and plastic types, including preterminated and solder bucket connectors. Jackposts are supplied in bags containing 2 jackposts , 2 washers and 2 hex nutsJackpost ...
From Harting, these side entry hoods are for ...
Description:
From Harting, these side entry hoods are for use with the Harting series of D-sub connectors. The hoods are constructed from grey thermoplastic and feature internal tin-plate screening, so a robust housing is assured. With a metal lamp and screws, ...