Terasic P0039 SDI to HSMC Adapter Board

  • RS-artikelnummer 768-9035
  • Tillv. art.nr P0039
  • Tillverkare / varumärke Terasic
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Terasic SDI HSMC Board

The Transceiver Serial Digital Interface (SDI) HSMC board provides a hardware platform for developing video broadcasting systems. It is intended to be used by customers to implement and design SDI and AES systems based on transceiver-based host boards with an HSMC interface. It can also be part of an openly sold Development Kit, or bundled with packages of software and IP cores.

2 x SDI transmit (TX) channels with SDI cable tri-speed drivers
2 x SDI receive (RX) channels with SDI cable equalizers
2 x 75Ω BNC SDI TX interfaces
2 x 75Ω BNC SDI RX interfaces
Adjustable 1.1 to 1.8V and standard 3.3V CMOS Input Signal Levels
2 x RS-422 transceivers for AES3 TX and AES3 RX channels
2 x 75Ω BNC AES3 RX interfaces
2 x 75Ω BNC AES3 TX interfaces
High frequency switching regulator for 12V to 5V power supply conversion
3 x linear regulators for 5V to 3.3V low noise power supply conversion
FDTIM analysis for power distribution network (PDN) decoupling
SDI multi-frequency VCXO femto clock video PLL
98.304MHz / 90.3168MHz / 122.88MHz / 112.896MHz voltage-controlled crystal oscillator (VCXO) based phase-locked loop (PLL)
LVPECL differential clock buffer with two differential outputs - HSMC and SMA
4 x digital audio isolation transformers
Multi-format video sync separator
HSMC connector for interface conversion, fully compatible with HSMC host boards

Supplied with

System CD ROM

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifikationer
Attribute Value
Kit Classification Adapter Board
Kit Name SDI to HSMC
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Pris (ex. moms) Each
5 395,83 kr
(exkl. moms)
6 744,79 kr
(inkl. moms)
Enheter
Per unit
1 - 4
5 395,83 kr
5 +
5 260,99 kr
Nästa dag-leverans inte möjlig
Related Products
The Si522xx is the industry's highest performance and ...
Description:
The Si522xx is the industry's highest performance and lowest power PCI Express clock generator family for 1.5–1.8 V PCIe Gen1/2/3/4 and SRIS applications. The Si52212, Si52208, and Si52204 can source twelve, eight, and four 100 MHz PCIe differential clock outputs, ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. GSM Click is a compact and easy solution for adding the GSM/GPRS mobile phone standard to your design. Quectel M95 GSM moduleSupports GSM/GPRS 850/900/1800/1900MHz Quad-band frequency85.6kbps ...
Description:
The ETH WIZ click is an add-on board that is perfect for embedded applications that require an easy, stable and secure internet connection.Features & Benefits of the ETH WIZ click•W5500 10/100 BASE-TX ethernet controller•Supports TCP, UDP, KMP, IPv4, ARP, IGMP ...
A versatile evaluation kit from Telit which provides ...
Description:
A versatile evaluation kit from Telit which provides an excellent environment for the development of mobile communications applications based on the Telit GSM/GPRS, UMTS/HSPA, CDMA 1x/EV-DO, and LTE module families. The kit can significantly reduce time-to-market for many wireless application ...