Silicon Labs SLWSTK6063A, EFR32 Wireless Protocol Development Starter Kit Flex Gecko

  • RS-artikelnummer 122-9764
  • Tillv. art.nr SLWSTK6063A
  • Tillverkare / varumärke Silicon Labs
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

EFR32FG Flex Gecko 2.4GHz/434MHz Dual-Band Starter Kit

The SLWSTK6063A Wireless Starter Kit (WSTK) is an excellent starting point to get familiar with the EFR32 Flex Gecko Wireless System-on-Chip (SoC). The WSTK BRD4001A mainboard features an on-board J-Link debugger, an Advanced Energy Monitor (AEM) for real-time current and voltage monitoring, and a Virtual COM port interface (VCOM). Packet Trace Interface (PTI) is supported.
The mainboard (BRD4001A) is paired with the EFR32FG 2400/434 MHz SLWRB4251B radio board (RS 122-9769) plugged directly into the mainboard. The radio board can also be used as a reference design for matching networks of the RF interfaces.
All debug functionality, including AEM, VCOM and PTI, can also be used towards an external device instead of the included radio board.

Features

Ethernet and USB connectivity
SEGGER J-Link on-board debugger
AEM, VCOM and PTI support
Si7021 humidity and temperature sensor
Ultra-low power 128 x 128 pixel memory, buttons and LEDs
20-pin 2.54 mm header for expansion boards
Battery or USB powered

Features (radio board)

EFR32 Flex Gecko Wireless SoC with 256 kB Flash and 32 kB RAM (EFR32FG1P133F256GM48)
Inverted-F PCB antenna (2.4 GHz band)
SMA connector (434 MHz band)

Note

The following items are included in the box:
• 2x BRD4001A Wireless Starter Kit Mainboards
• 2x BRD4251B EFR32FG 2400/434 MHz 10 dBm Radio Boards
• 2x 434 MHz antennas with SMA connector
• 2x CR2032 Lithium batteries
• 2x AA battery holders
• 2x USB Type A to USB Mini-B cables
• 1x BRD8010A WSTK Debug Adapter

Specifikationer
Attribute Value
RF Technology Wireless Protocol Development
Kit Classification Starter Kit
Featured Device EFR32
Kit Name Flex Gecko
Frequency 2.4 GHz, 434 MHz
Tillfälligt slut i lager – restorder för leverans 2020-11-11
Pris (ex. moms) Each
2 889,62 kr
(exkl. moms)
3 612,02 kr
(inkl. moms)
Enheter
Per unit
1 - 2
2 889,62 kr
3 - 4
2 811,55 kr
5 - 9
2 737,52 kr
10 - 24
2 667,31 kr
25 +
2 600,61 kr
Related Products
The HL series Development Kit from Sierra Wireless ...
Description:
The HL series Development Kit from Sierra Wireless is designed to evaluate the HL6528x, HL75xx and HL85xx embedded modules. The board features an innovative snap-in socket which enables you to attach your chosen HL module. This socket eliminates the need ...
Opto 2 click is a galvanic isolator Click ...
Description:
Opto 2 click is a galvanic isolator Click board™, used to provide an optical isolation of sensitive microcontroller (MCU) pins, when operated by external signals. TLP2770 opto-isolation elements (optocouplers) can be driven with a very low current, down to 1.3mA ...
No firmware development requiredSimple GUI-based configuratorIntegrated USB transceiver, ...
Description:
No firmware development requiredSimple GUI-based configuratorIntegrated USB transceiver, no external resistors requiredIntegrated clock, no external crystal requiredUSB 2.0 full-speed compatibleData transfer rates up to 3 MbaudUSB Battery Charger Detection (USB BCS 1.2 Specification)Remote wakeup for waking a ...
Build 802.11 b/g wireless networking into your products ...
Description:
Build 802.11 b/g wireless networking into your products or virtually any electronic device Wired Ethernet-to-wireless bridgingBulletproof wireless security with IEEE 802.11i-PSK, WPA-PSK, TKIPSecure end-to-end communication with Advanced Encryption Standards (AES)FCC Class B, UL and EN EMC and safety-compliant.