FTDI Chip, Type A USB Interface Board, VDRIVE2

  • RS-artikelnummer 429-296
  • Tillv. art.nr VDRIVE2
  • Tillverkare / varumärke FTDI Chip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

FTDI Chip USB Interface Board

The FTDI chip USB interface board is possibly the easiest solution for adding a USB flash drive interface to an existing product. The module features a USB connector interface connected to the VNC1L USB Host controller. The module provides a simple 4-signal interface supporting easy connectivity to an external device via UART or SPI. The connector interface also features 5V and ground connections. It is ideal for evaluation and development of VNC1L designs.

Features and Benefits

8-pin connector with 2mmpitch
8-way header interconnect cable provided
Enclosure with snap in place clips allows for easy front panel mounting
Jumper selectable UART or SPI interfaces
Program or update firmware via USB Flash disk or via UART interface
Traffic indicator LED
USB ’A’ type socket to connect USB flash disk
Uses Vinculum VDAP firmware and command set

Applications

Communication
Embedded system

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specifikationer
Attribute Value
Kit Classification Interface Board
Kit Name Type A
167 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
223,14 kr
(exkl. moms)
278,92 kr
(inkl. moms)
Enheter
Per unit
1 - 4
223,14 kr
5 - 9
211,97 kr
10 - 24
203,08 kr
25 +
189,64 kr
Related Products
The TTL-234X-3V3-2mm cable is terminated by an 8 ...
Description:
The TTL-234X-3V3-2mm cable is terminated by an 8 way, 2mm pitch, Single-In-Line (SIL) keyed connector. The TTL-234X-3V3-2mm operates at +3.3V levels (signals only, VCC=+5V). These cables are primarily intended for interfacing the FTDI VDRIVE2 and VMUSIC2 modules. Note that when ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, ...
Description:
The TTL-234X-5V-WE and TTL-234X-3V3-WE cables are both un-terminated, they are bare and tinned wires. The difference between the two cables is that the TTL-234X-5V-WE operates at +5V levels (signals and power supply) and the TTL-234X-3V3-WE operates at +3.3V levels (signals ...
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. (687-7730) USB-COM232-Plus1 - USB to RS232 Adapter(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter(687-7742) USB-COM232-Plus4 - USB to ...