Huco Friction Clutch, 8mm Bore 132Ncm
- RS-artikelnummer:
- 890-3027
- Tillv. art.nr:
- 269P25.2828.RS
- Tillverkare / varumärke:
- Huco
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Nästa dag-leverans inte möjlig
Lagt till varukorgen
Pris (ex. moms) Varje
806,61 kr
(exkl. moms)
1 008,26 kr
(inkl. moms)
| Enheter | Per unit |
| 1 - 4 | 806,61 kr |
| 5 - 9 | 774,33 kr |
| 10 + | 758,25 kr |
- RS-artikelnummer:
- 890-3027
- Tillv. art.nr:
- 269P25.2828.RS
- Tillverkare / varumärke:
- Huco
Lagstiftning och ursprungsland
- COO (Country of Origin):
- GB
Produktdetaljer
6 Plate Adjustable Friction Clutches with Clamp Oldham Coupler, Set Screw & Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
Specifikationer
Attribute | Value |
|---|---|
| Bore | 8mm |
| Torque Rating | 132Ncm |
| Body Diameter | 25.8mm |