TE Connectivity M25 Adapter, Zinc Cobalt Plate, 31.75mm

  • RS-artikelnummer 765-0220
  • Tillv. art.nr BNX40AU00-1612
  • Tillverkare / varumärke TE Connectivity
Datablad
Lagstiftning och ursprungsland
Uppfyller ej
Produktdetaljer

TE Connectivity BNX Series MIL-C-38999 Bandstrap Adaptors

These BNX series MIL-C-38999 Bandstrap adaptors are used with a corrosion resistant steel band (must be ordered separately - see stock number 765-0312) and are designed to terminate a braided cable shield to a connector (Raychem code 40 D38999 connector (see note). The resulting 360° termination creates an electrical connection and provides screen continuity between braid and adaptor. The terminated cable can then be sealed and protected using a heat-shrinkable moulded boot. The bodies of these BNX MIL-C-38999 band strap adapters have a straight alignment and are made from aluminum alloy per QQ-A-225. and are available in a choice of finishes;
BNX40AB00-xxxx - Cadmium Finish, Olive Drab
BNX40AU00-xxxx- Zinc Cobalt Finish
BNX40AZ00-xxxx - Zinc Nickel Finish

Note

For use with Code 40 MIL-C-38999 Raychem connectors as follows:
D38999/20, Series III: Class C, F, K, W - Receptacle, wall mount flange
D38999/24, Series III: Class C, F, K, W - Receptacle, jam nut mount
D38999/26, Series III: Class C, F, K, W - Plug, EMI grounding fingers
D38999/40, Series IV: Class C, F,W - Receptacle, wall mount flange
D38999/46, Series IV: Class F,W - Plug, EMI grounding fingers
D38999/47, Series IV: Class C,W - Plug
providing water tight seal meeting requirements of MIL-C-85049, PAR 3.5.7.

TE Connectivity MIL-C -38999 Accessories

Specifikationer
Attribute Value
End 1 D38999 Series III/IV Shell Size 17(E)
End 1 Size M25
Body Orientation Straight
Shell Plating Zinc Cobalt
Length 31.75mm
32 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
416,73 kr
(exkl. moms)
520,91 kr
(inkl. moms)
Enheter
Per unit
1 - 4
416,73 kr
5 - 14
403,73 kr
15 - 24
391,98 kr
25 - 49
380,94 kr
50 +
370,19 kr
Related Products
T with male M12 output, designed to be ...
Description:
T with male M12 output, designed to be connected to a splitter.Featuring two female M12 (5 poles) or M8 (3 poles) connector inputs, designed to accept 2 sensors.Allow twice as many sensors to be connected to a splitter.
From Toughcon, these angled adapters make it possible ...
Description:
From Toughcon, these angled adapters make it possible to align panel-mounted receptacles at 90° to the attachment surface. The receptacles are attached to the angled adapter with four M3 screws. All models are highly reliable and excellent quality. Material Zinc ...
The contact support holder is used for holding ...
Description:
The contact support holder is used for holding the contact support in the shell with plugs and receptacles of the Toughcon TM series. The contact support holder is part of the scope of supply for panel-mounted receptacles and cable-mounted receptacles. ...
The angled adapter makes it possible to align ...
Description:
The angled adapter makes it possible to align the Toughcon panel-mounted receptacles at 90° to the attachment surface. Material Zinc die-castTemperature range -55°C to +90°C.