MPLAB PM3 universal device programmer

  • RS-artikelnummer 517-2661
  • Tillv. art.nr DV007004
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

MPLAB PM3 Universal Device Programmer

Microchips DV007004 or more commonly known, MPLAB PM3 is a brilliant and easy to use stand-alone unit or PC operated device programmer. MPLAB PM3 is designed to program Microchips range of PIC devices. Not to mention, this device can program the latest dsPIC DSC devices too. The interface features 3 quick easy ports (2x Socket modules and 1x ICSP connector) to allow you to program on the fly.

The MPLAB PM3 contains 3 modes. PC Host for full control, stand-alone programming and safe mode to allow you to program almost anywhere at a fast pace.

Features and Benefits:

  • Easy to use interface with built-in display

  • LEDs to indicate power and errors for easy diagnoses

  • SQTPsm serialization for programming unique serial numbers (only PC host mode)

  • Alternative DOS command-line interface is available for batch control

  • SD and Multimedia card slot for on the fly use (data can be saved and loaded)

  • Buzzer sound for loud environments

  • Easily program Microchips line of dsPIC DSC and PIC devices

  • RS-232 interface and USB

  • Support for PROMATE II socket modules

Accessories:

MPLAB PM3 ICSP Cable – 667-7814
Chip Programming Adapter (AC164111) – 667-7883

Whats in the box?

Supplied with the MPLAB is; 1x MPLAB PM3 unit, RS-232 cable, USB cable, ICSP cable, power supply and cables, MPLAB IDE CD, user manual and technical documentation.

Supplied with

RS-232 cable, USB cable, ICSP cable, power supply and cables, MPLAB IDE CD, user’s manual and technical documentation on CD (Kit only).

Specifikationer
Attribute Value
Interface USB
Programmer Name MPLAB PM3
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
7 979,61 kr
(exkl. moms)
9 974,51 kr
(inkl. moms)
Enheter
Per unit
1 +
7 979,61 kr
Related Products
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C ...
The VERYPRO-390 is a Universal Programmer with 48-pins ...
Description:
The VERYPRO-390 is a Universal Programmer with 48-pins Zero Insertion Force (ZIF) socket and USB 2.0 interface for EPROMs, EEPROMs, FLASH Memory, PLD (CPLD, EPLD, GAL, PEEL, PALCE and more), and Microcontrollers with TTL/CMOS ICs test software. The programmer is ...
Supported devices: EPROM, Paged EPROM, Parallel and Serial ...
Description:
Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, Flash Memory (NOR Flash), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, MicrocontrollersSupport 70000 devices 274 IC manufacturersThis Programmer supports reduced number of devices than the SUPERPRO-5004GP, while all ...