RS PRO 50VA 2 Output Chassis Mounting Transformer, 12V ac

  • RS-artikelnummer 504-256
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): PL
Produktdetaljer

Chassis Mount Clamp & Frame Construction 115/230Vac Primary Transformer

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps 6VA to 50VA
Multi-hole frame fixing 100VA
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

Note

Suitable transformer shrouds: 6VA = 503-912 ; 12 & 20VA = 504-004 ; 50, 75 & 100VA = 503-928

Approvals

8888

Standards

BS3535; EN 60 742

Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA

Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Specifikationer
Attribute Value
Primary Voltage Rating 115V ac
Secondary Voltage Rating 12V ac
Power Rating 50VA
Number of Outputs 2
Mounting Type Clamp Mount
Length 79mm
Width 62mm
Depth 65mm
Dimensions 79 x 62 x 65mm
Fixing Hole Diameter 4.7 x 9.5mm
Weight 1kg
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
59 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
264,91 kr
(exkl. moms)
331,14 kr
(inkl. moms)
Enheter
Per unit
1 - 9
264,91 kr
10 - 24
235,75 kr
25 - 49
216,83 kr
50 - 99
199,46 kr
100 +
185,91 kr
Related Products
Chassis mounting low voltage mains transformers with a ...
Description:
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options. Double section bobbin construction ...
Secondary voltages are nominal load voltages on resistive ...
Description:
Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist.
230Va.c. 50 to 60Hz primarySingle or twin secondary ...
Description:
230Va.c. 50 to 60Hz primarySingle or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their ...
3x2 windingsIsolation voltage 500VdcLow stray inductanceOperating temperature: -40°C ...
Description:
3x2 windingsIsolation voltage 500VdcLow stray inductanceOperating temperature: -40°C to +125°CApplications include: flyback, forward, push-pull, step-down, step-up, SEPIC converters.